Shelf Board in Painted MDF 900mm Wide by 250mm Deep
Shelf Board in Painted MDF 900mm Wide by 250mm Deep
A single 900mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for the standard bay between two uprights at 600mm centres.
Boards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.
Specification
- Dimensions: 900mm wide by 250mm deep by 30mm thick
- Material: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane
- Finish: finished on all six faces, front edge eased to a 2mm radius
- Load rating: 28kg evenly distributed on brackets at 600mm centres
- Span and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm
- Adjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf
- Suitable walls: not applicable, this is a board only
- Fixings: not applicable
- Depth: 250mm as standard, 200mm, 300mm and 400mm on request
- Stable engineered board, no moisture movement to speak of
- Cut to a shorter length free of charge if you ask at the checkout
- Weight: approximately 6.7 kilograms
- Sold singly
What you get
- One shelf board in painted mdf, 900mm by 250mm by 30mm
- Two shelf clips
- A touch up pen in the matching colour
Fitting
Two people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.