Hardwax Oil for Walnut 250ml

Hardwax Oil for Walnut 250ml

£19.95
Skip to product information
Hardwax Oil for Walnut 250ml

Hardwax Oil for Walnut 250ml

£19.95
Taxes included. Shipping calculated at checkout.

A slightly darker oil mixed for walnut, because a clear oil on walnut lifts the colour unevenly across the board.

Solid timber shelving is not high maintenance but it is not zero maintenance either. An oiled shelf that is never re oiled will dry out, take up water unevenly and eventually mark where a glass has stood. The remedy is ten minutes with a cloth once a year, and it is genuinely that simple. Painted and lacquered boards need nothing except a damp cloth and the occasional touch up on the front edge.

Specification

  • Dimensions: see the product name
  • Material: natural oils and waxes, or acrylic paint for the pens
  • Finish: matt as standard, satin on request for the oils
  • Load rating: not applicable
  • Span and bracket spacing: not applicable
  • Adjustability: not applicable
  • Suitable walls: not applicable
  • Fixings: not applicable
  • Coverage: about 12 square metres per 250ml, which is a lot of shelving
  • Drying time: touch dry in 4 hours, fully cured in 7 days
  • Food safe certification supplied where the product carries it
  • Weight: approximately 0.35 kilograms

What you get

  • One hardwax oil for walnut 250ml
  • An application cloth where the product needs one
  • A care card with the re oiling intervals for each material

Fitting

Nothing to fit. Apply a thin coat with a lint free cloth along the grain, leave it twenty minutes, then wipe off everything that has not soaked in. The commonest mistake is putting it on too thick, which leaves a sticky surface that takes a week to harden.