Shelf Board in Powder Coated Steel 1200mm Wide by 250mm Deep

A single 1200mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.

Boards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.

Specification

• Dimensions: 1200mm wide by 250mm deep by 30mm thick
• Material: 1.5mm folded steel with a returned edge, powder coated
• Finish: finished on all six faces, front edge eased to a 2mm radius
• Load rating: 59kg evenly distributed on brackets at 600mm centres
• Span and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm
• Adjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf
• Suitable walls: not applicable, this is a board only
• Fixings: not applicable
• Depth: 250mm as standard, 200mm, 300mm and 400mm on request
• Stable engineered board, no moisture movement to speak of
• Cut to a shorter length free of charge if you ask at the checkout
• Weight: approximately 6.0 kilograms
• Sold singly

What you get

• One shelf board in powder coated steel, 1200mm by 250mm by 30mm
• Two shelf clips
• A touch up pen in the matching colour

Fitting

Two people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.