{"product_id":"stud-detector-and-marking-set","title":"Stud Detector and Marking Set","description":"\u003cp\u003eA stud detector, a 2 metre marking tape, a pencil and a roll of low tack tape for marking a wall without leaving pencil on the paint.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne stud detector and marking set as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696160591,"sku":"HMS-FIX-006","price":33.95,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/homartshelfs.com\/products\/stud-detector-and-marking-set","provider":"Homart Shelfs","version":"1.0","type":"link"}