{"title":"Under £100","description":"\u003cp\u003eSingle shelves, ledges, brackets, fixings and care products. The sensible place to start if you are testing whether a wall will take what you have in mind.\u003c\/p\u003e","products":[{"product_id":"floating-shelf-in-birch-plywood-600mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678596943,"sku":"HMS-FLS-004-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678629711,"sku":"HMS-FLS-004-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678662479,"sku":"HMS-FLS-004-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_600mm_Wide_by_200mm_Deep.jpg?v=1789050298"},{"product_id":"floating-shelf-in-painted-mdf-600mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 16kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678695247,"sku":"HMS-FLS-005-BK","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678728015,"sku":"HMS-FLS-005-RS","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678760783,"sku":"HMS-FLS-005-WH","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_600mm_Wide_by_200mm_Deep.jpg?v=1789050352"},{"product_id":"picture-ledge-in-solid-oak-600mm-wide","title":"Picture Ledge in Solid Oak 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid oak, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid oak, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683086159,"sku":"HMS-PLG-001-BK","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683118927,"sku":"HMS-PLG-001-RS","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683151695,"sku":"HMS-PLG-001-WH","price":74.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Oak_600mm_Wide.jpg?v=1789050977"},{"product_id":"picture-ledge-in-solid-ash-600mm-wide","title":"Picture Ledge in Solid Ash 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid ash, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 12kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid ash, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683184463,"sku":"HMS-PLG-002-BK","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683217231,"sku":"HMS-PLG-002-RS","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683249999,"sku":"HMS-PLG-002-WH","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Ash_600mm_Wide.jpg?v=1789050993"},{"product_id":"picture-ledge-in-solid-walnut-600mm-wide","title":"Picture Ledge in Solid Walnut 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid walnut, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid walnut, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683315535,"sku":"HMS-PLG-003-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683348303,"sku":"HMS-PLG-003-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683381071,"sku":"HMS-PLG-003-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Walnut_600mm_Wide.jpg?v=1789050955"},{"product_id":"picture-ledge-in-painted-mdf-600mm-wide","title":"Picture Ledge in Painted MDF 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 10kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683479375,"sku":"HMS-PLG-004-BK","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683512143,"sku":"HMS-PLG-004-RS","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683544911,"sku":"HMS-PLG-004-WH","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_600mm_Wide.jpg?v=1789050865"},{"product_id":"picture-ledge-in-solid-oak-900mm-wide","title":"Picture Ledge in Solid Oak 900mm Wide","description":"\u003cp\u003eA single 900mm picture ledge in solid oak, 90mm deep with a 22mm lip. Sized for the standard length, which takes two A3 frames side by side.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid oak, 900mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683577679,"sku":"HMS-PLG-005-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683610447,"sku":"HMS-PLG-005-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683643215,"sku":"HMS-PLG-005-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Oak_900mm_Wide.jpg?v=1789050993"},{"product_id":"picture-ledge-in-solid-ash-900mm-wide","title":"Picture Ledge in Solid Ash 900mm Wide","description":"\u003cp\u003eA single 900mm picture ledge in solid ash, 90mm deep with a 22mm lip. Sized for the standard length, which takes two A3 frames side by side.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid ash, 900mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683708751,"sku":"HMS-PLG-006-BK","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683741519,"sku":"HMS-PLG-006-RS","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683774287,"sku":"HMS-PLG-006-WH","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Ash_900mm_Wide.jpg?v=1789050992"},{"product_id":"picture-ledge-in-painted-mdf-900mm-wide","title":"Picture Ledge in Painted MDF 900mm Wide","description":"\u003cp\u003eA single 900mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for the standard length, which takes two A3 frames side by side.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 15kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 900mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684036431,"sku":"HMS-PLG-008-BK","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684069199,"sku":"HMS-PLG-008-RS","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684101967,"sku":"HMS-PLG-008-WH","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_900mm_Wide.jpg?v=1789050865"},{"product_id":"picture-ledge-in-painted-mdf-1200mm-wide","title":"Picture Ledge in Painted MDF 1200mm Wide","description":"\u003cp\u003eA single 1200mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for three A3 frames or one large canvas leaning.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684626255,"sku":"HMS-PLG-012-BK","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684659023,"sku":"HMS-PLG-012-RS","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684691791,"sku":"HMS-PLG-012-WH","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_1200mm_Wide.jpg?v=1789050961"},{"product_id":"picture-ledge-in-painted-mdf-1500mm-wide","title":"Picture Ledge in Painted MDF 1500mm Wide","description":"\u003cp\u003eA single 1500mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for a long wall above a sofa or a bed.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 26kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 1500mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776685248847,"sku":"HMS-PLG-016-BK","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776685281615,"sku":"HMS-PLG-016-RS","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776685314383,"sku":"HMS-PLG-016-WH","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_1500mm_Wide.jpg?v=1789050962"},{"product_id":"slotted-track-upright-1200mm","title":"Slotted Track Upright 1200mm","description":"\u003cp\u003eA single 1200mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a short run above a desk or a worktop.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 37 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 1200mm\u003c\/li\u003e\n\u003cli\u003e6 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776685379919,"sku":"HMS-UPR-001-BK","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776685412687,"sku":"HMS-UPR-001-RS","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776685445455,"sku":"HMS-UPR-001-WH","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776685478223,"sku":"HMS-UPR-001-BR","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_1200mm.jpg?v=1789050969"},{"product_id":"slotted-track-upright-1500mm","title":"Slotted Track Upright 1500mm","description":"\u003cp\u003eA single 1500mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a standard wall where you do not want the track reaching the ceiling.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 46 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 1500mm\u003c\/li\u003e\n\u003cli\u003e7 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776685543759,"sku":"HMS-UPR-002-BK","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776685576527,"sku":"HMS-UPR-002-RS","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776685609295,"sku":"HMS-UPR-002-WH","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776685642063,"sku":"HMS-UPR-002-BR","price":46.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_1500mm.jpg?v=1789050946"},{"product_id":"slotted-track-upright-1800mm","title":"Slotted Track Upright 1800mm","description":"\u003cp\u003eA single 1800mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for the standard length and the one most systems use.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 56 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 1800mm\u003c\/li\u003e\n\u003cli\u003e9 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776685838671,"sku":"HMS-UPR-003-BK","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776685871439,"sku":"HMS-UPR-003-RS","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776685904207,"sku":"HMS-UPR-003-WH","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776685936975,"sku":"HMS-UPR-003-BR","price":59.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"slotted-track-upright-2000mm","title":"Slotted Track Upright 2000mm","description":"\u003cp\u003eA single 2000mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a contract or workshop installation, or a high skirting.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2000mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 62 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 2000mm\u003c\/li\u003e\n\u003cli\u003e10 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776686035279,"sku":"HMS-UPR-004-BK","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776686068047,"sku":"HMS-UPR-004-RS","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776686100815,"sku":"HMS-UPR-004-WH","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776686133583,"sku":"HMS-UPR-004-BR","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_2000mm.jpg?v=1789050966"},{"product_id":"slotted-track-upright-2400mm","title":"Slotted Track Upright 2400mm","description":"\u003cp\u003eA single 2400mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a floor to ceiling run in a standard modern room.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 75 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 2400mm\u003c\/li\u003e\n\u003cli\u003e12 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776686199119,"sku":"HMS-UPR-005-BK","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776686231887,"sku":"HMS-UPR-005-RS","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776686264655,"sku":"HMS-UPR-005-WH","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776686297423,"sku":"HMS-UPR-005-BR","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_2400mm.jpg?v=1789050962"},{"product_id":"slotted-track-upright-2700mm","title":"Slotted Track Upright 2700mm","description":"\u003cp\u003eA single 2700mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a floor to ceiling run in a Victorian room.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2700mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 84 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 2700mm\u003c\/li\u003e\n\u003cli\u003e13 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776686330191,"sku":"HMS-UPR-006-BK","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776686362959,"sku":"HMS-UPR-006-RS","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776686395727,"sku":"HMS-UPR-006-WH","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776686428495,"sku":"HMS-UPR-006-BR","price":94.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_2700mm.jpg?v=1789050966"},{"product_id":"shelf-bracket-standard-150mm","title":"Shelf Bracket Standard 150mm","description":"\u003cp\u003eA single 150mm standard bracket, for a narrow shelf for spices, paperbacks or a bathroom. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 150mm deep, 82mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.14 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 150mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776686559567,"sku":"HMS-BRK-001-1","price":10.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776686592335,"sku":"HMS-BRK-001-4","price":41.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776686625103,"sku":"HMS-BRK-001-10","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776686657871,"sku":"HMS-BRK-001-20","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Standard_150mm.jpg?v=1789050946"},{"product_id":"shelf-bracket-standard-200mm","title":"Shelf Bracket Standard 200mm","description":"\u003cp\u003eA single 200mm standard bracket, for a floating style shelf depth or a picture ledge. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 200mm deep, 110mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 52kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.18 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 200mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776686723407,"sku":"HMS-BRK-002-1","price":11.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776686756175,"sku":"HMS-BRK-002-4","price":45.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776686788943,"sku":"HMS-BRK-002-10","price":109.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776686821711,"sku":"HMS-BRK-002-20","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Standard_200mm.jpg?v=1789050994"},{"product_id":"shelf-bracket-standard-250mm","title":"Shelf Bracket Standard 250mm","description":"\u003cp\u003eA single 250mm standard bracket, for the standard depth and the one most systems use. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 250mm deep, 137mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.23 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 250mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776686887247,"sku":"HMS-BRK-003-1","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776686920015,"sku":"HMS-BRK-003-4","price":48.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776686952783,"sku":"HMS-BRK-003-10","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776686985551,"sku":"HMS-BRK-003-20","price":219.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-bracket-standard-300mm","title":"Shelf Bracket Standard 300mm","description":"\u003cp\u003eA single 300mm standard bracket, for a kitchen shelf that has to take a dinner plate upright. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm deep, 165mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.27 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 300mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687051087,"sku":"HMS-BRK-004-1","price":14.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687083855,"sku":"HMS-BRK-004-4","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687116623,"sku":"HMS-BRK-004-10","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776687149391,"sku":"HMS-BRK-004-20","price":259.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-bracket-standard-350mm","title":"Shelf Bracket Standard 350mm","description":"\u003cp\u003eA single 350mm standard bracket, for a utility room or a shelf carrying baskets. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 350mm deep, 192mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.32 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 350mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687214927,"sku":"HMS-BRK-005-1","price":16.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687247695,"sku":"HMS-BRK-005-4","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687280463,"sku":"HMS-BRK-005-10","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776687313231,"sku":"HMS-BRK-005-20","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Standard_350mm.jpg?v=1789050956"},{"product_id":"shelf-bracket-standard-400mm","title":"Shelf Bracket Standard 400mm","description":"\u003cp\u003eA single 400mm standard bracket, for a dressing room, a workshop or anything holding a crate. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm deep, 220mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 3mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.36 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne standard bracket, 400mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687378767,"sku":"HMS-BRK-006-1","price":18.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687411535,"sku":"HMS-BRK-006-4","price":69.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687444303,"sku":"HMS-BRK-006-10","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776687477071,"sku":"HMS-BRK-006-20","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Standard_400mm.jpg?v=1789050953"},{"product_id":"shelf-bracket-heavy-duty-250mm","title":"Shelf Bracket Heavy Duty 250mm","description":"\u003cp\u003eA single 250mm heavy duty bracket, for the standard depth in the gusseted heavy duty bracket. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 250mm deep, 137mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a welded gusset\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.23 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne heavy duty bracket, 250mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687509839,"sku":"HMS-BRK-007-1","price":18.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687542607,"sku":"HMS-BRK-007-4","price":69.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687575375,"sku":"HMS-BRK-007-10","price":169.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776687608143,"sku":"HMS-BRK-007-20","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Heavy_Duty_250mm.jpg?v=1789050984"},{"product_id":"shelf-bracket-heavy-duty-300mm","title":"Shelf Bracket Heavy Duty 300mm","description":"\u003cp\u003eA single 300mm heavy duty bracket, for a garage or a workshop at standard depth. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm deep, 165mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a welded gusset\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.27 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne heavy duty bracket, 300mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687706447,"sku":"HMS-BRK-008-1","price":21.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687739215,"sku":"HMS-BRK-008-4","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687771983,"sku":"HMS-BRK-008-10","price":199.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776687804751,"sku":"HMS-BRK-008-20","price":369.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Heavy_Duty_300mm.jpg?v=1789051006"},{"product_id":"shelf-bracket-heavy-duty-400mm","title":"Shelf Bracket Heavy Duty 400mm","description":"\u003cp\u003eA single 400mm heavy duty bracket, for the deepest and strongest bracket in the range. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 400mm deep, 220mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a welded gusset\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.36 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne heavy duty bracket, 400mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776687903055,"sku":"HMS-BRK-009-1","price":26.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776687935823,"sku":"HMS-BRK-009-4","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776687968591,"sku":"HMS-BRK-009-10","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776688001359,"sku":"HMS-BRK-009-20","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Heavy_Duty_400mm.jpg?v=1789050968"},{"product_id":"shelf-bracket-braced-desk-600mm","title":"Shelf Bracket Braced Desk 600mm","description":"\u003cp\u003eA single 600mm braced desk bracket, for a desk shelf, braced with a diagonal stay. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm deep, 330mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a diagonal stay\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 80kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.54 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne braced desk bracket, 600mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776688099663,"sku":"HMS-BRK-010-1","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776688132431,"sku":"HMS-BRK-010-4","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776688165199,"sku":"HMS-BRK-010-10","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776688197967,"sku":"HMS-BRK-010-20","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Braced_Desk_600mm.jpg?v=1789050968"},{"product_id":"shelf-bracket-braced-desk-500mm","title":"Shelf Bracket Braced Desk 500mm","description":"\u003cp\u003eA single 500mm braced desk bracket, for a narrower desk or a dressing table shelf. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 500mm deep, 275mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a diagonal stay\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 90kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.45 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne braced desk bracket, 500mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776688296271,"sku":"HMS-BRK-011-1","price":32.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776688329039,"sku":"HMS-BRK-011-4","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776688361807,"sku":"HMS-BRK-011-10","price":299.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776688394575,"sku":"HMS-BRK-011-20","price":559.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Braced_Desk_500mm.jpg?v=1789050954"},{"product_id":"shelf-bracket-angled-display-300mm","title":"Shelf Bracket Angled Display 300mm","description":"\u003cp\u003eA single 300mm angled display bracket, for a forward facing book or magazine display shelf. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 300mm deep, 165mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.27 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne angled display bracket, 300mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776688427343,"sku":"HMS-BRK-012-1","price":20.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776688460111,"sku":"HMS-BRK-012-4","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776688492879,"sku":"HMS-BRK-012-10","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776688525647,"sku":"HMS-BRK-012-20","price":359.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Angled_Display_300mm.jpg?v=1789050922"},{"product_id":"shelf-board-in-solid-oak-600mm-wide-by-250mm-deep","title":"Shelf Board in Solid Oak 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in solid oak, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 24kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid oak, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776688591183,"sku":"HMS-BRD-001-250","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776688623951,"sku":"HMS-BRD-001-200","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776688656719,"sku":"HMS-BRD-001-300","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776688689487,"sku":"HMS-BRD-001-400","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Oak_600mm_Wide_by_250mm_Deep.jpg?v=1789050936"},{"product_id":"shelf-board-in-solid-ash-600mm-wide-by-250mm-deep","title":"Shelf Board in Solid Ash 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in solid ash, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid ash, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776688918863,"sku":"HMS-BRD-003-250","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776688951631,"sku":"HMS-BRD-003-200","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776688984399,"sku":"HMS-BRD-003-300","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689017167,"sku":"HMS-BRD-003-400","price":109.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Ash_600mm_Wide_by_250mm_Deep.jpg?v=1789050975"},{"product_id":"shelf-board-in-birch-plywood-600mm-wide-by-250mm-deep","title":"Shelf Board in Birch Plywood 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in birch plywood, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in birch plywood, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689115471,"sku":"HMS-BRD-004-250","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689148239,"sku":"HMS-BRD-004-200","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689181007,"sku":"HMS-BRD-004-300","price":69.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689213775,"sku":"HMS-BRD-004-400","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Birch_Plywood_600mm_Wide_by_250mm_Deep.jpg?v=1789050920"},{"product_id":"shelf-board-in-painted-mdf-600mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689279311,"sku":"HMS-BRD-005-250","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689312079,"sku":"HMS-BRD-005-200","price":47.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689344847,"sku":"HMS-BRD-005-300","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689377615,"sku":"HMS-BRD-005-400","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Painted_MDF_600mm_Wide_by_250mm_Deep.jpg?v=1789050927"},{"product_id":"shelf-board-in-powder-coated-steel-600mm-wide-by-250mm-deep","title":"Shelf Board in Powder Coated Steel 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 29kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in powder coated steel, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689475919,"sku":"HMS-BRD-006-250","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689508687,"sku":"HMS-BRD-006-200","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689541455,"sku":"HMS-BRD-006-300","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689574223,"sku":"HMS-BRD-006-400","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Powder_Coated_Steel_600mm_Wide_by_250mm_Deep.jpg?v=1789050928"},{"product_id":"shelf-board-in-solid-ash-900mm-wide-by-250mm-deep","title":"Shelf Board in Solid Ash 900mm Wide by 250mm Deep","description":"\u003cp\u003eA single 900mm shelf board in solid ash, machined and finished, for adding a shelf to a system you already have. Sized for the standard bay between two uprights at 600mm centres.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 34kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid ash, 900mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689967439,"sku":"HMS-BRD-009-250","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690000207,"sku":"HMS-BRD-009-200","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690032975,"sku":"HMS-BRD-009-300","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690065743,"sku":"HMS-BRD-009-400","price":154.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Ash_900mm_Wide_by_250mm_Deep.jpg?v=1789050921"},{"product_id":"shelf-board-in-birch-plywood-900mm-wide-by-250mm-deep","title":"Shelf Board in Birch Plywood 900mm Wide by 250mm Deep","description":"\u003cp\u003eA single 900mm shelf board in birch plywood, machined and finished, for adding a shelf to a system you already have. Sized for the standard bay between two uprights at 600mm centres.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 30kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in birch plywood, 900mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690131279,"sku":"HMS-BRD-010-250","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690164047,"sku":"HMS-BRD-010-200","price":69.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690196815,"sku":"HMS-BRD-010-300","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690229583,"sku":"HMS-BRD-010-400","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Birch_Plywood_900mm_Wide_by_250mm_Deep.jpg?v=1789050944"},{"product_id":"shelf-board-in-painted-mdf-900mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 900mm Wide by 250mm Deep","description":"\u003cp\u003eA single 900mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for the standard bay between two uprights at 600mm centres.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 28kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 900mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690327887,"sku":"HMS-BRD-011-250","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690360655,"sku":"HMS-BRD-011-200","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690393423,"sku":"HMS-BRD-011-300","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690426191,"sku":"HMS-BRD-011-400","price":114.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Painted_MDF_900mm_Wide_by_250mm_Deep.jpg?v=1789050921"},{"product_id":"shelf-board-in-powder-coated-steel-900mm-wide-by-250mm-deep","title":"Shelf Board in Powder Coated Steel 900mm Wide by 250mm Deep","description":"\u003cp\u003eA single 900mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for the standard bay between two uprights at 600mm centres.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in powder coated steel, 900mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690491727,"sku":"HMS-BRD-012-250","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690524495,"sku":"HMS-BRD-012-200","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690557263,"sku":"HMS-BRD-012-300","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690590031,"sku":"HMS-BRD-012-400","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Powder_Coated_Steel_900mm_Wide_by_250mm_Deep.jpg?v=1789050953"},{"product_id":"shelf-board-in-birch-plywood-1200mm-wide-by-250mm-deep","title":"Shelf Board in Birch Plywood 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in birch plywood, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 41kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in birch plywood, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691179855,"sku":"HMS-BRD-016-250","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691212623,"sku":"HMS-BRD-016-200","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691245391,"sku":"HMS-BRD-016-300","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691278159,"sku":"HMS-BRD-016-400","price":154.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-board-in-painted-mdf-1200mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 37kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691343695,"sku":"HMS-BRD-017-250","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691376463,"sku":"HMS-BRD-017-200","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691409231,"sku":"HMS-BRD-017-300","price":109.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691441999,"sku":"HMS-BRD-017-400","price":144.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-board-in-powder-coated-steel-1200mm-wide-by-250mm-deep","title":"Shelf Board in Powder Coated Steel 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 59kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in powder coated steel, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691507535,"sku":"HMS-BRD-018-250","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691540303,"sku":"HMS-BRD-018-200","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691573071,"sku":"HMS-BRD-018-300","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691605839,"sku":"HMS-BRD-018-400","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Powder_Coated_Steel_1200mm_Wide_by_250mm_Deep.jpg?v=1789050984"},{"product_id":"shelf-board-in-painted-mdf-1500mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 1500mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1500mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for a three bay run in one board.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 47kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 1500mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776692457807,"sku":"HMS-BRD-023-250","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776692490575,"sku":"HMS-BRD-023-200","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776692523343,"sku":"HMS-BRD-023-300","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776692556111,"sku":"HMS-BRD-023-400","price":169.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Painted_MDF_1500mm_Wide_by_250mm_Deep.jpg?v=1789050920"},{"product_id":"steel-bookend-pair","title":"Steel Bookend Pair","description":"\u003cp\u003eA pair of L shaped bookends in 3mm steel with a felt foot, heavy enough to hold a row of hardbacks without a book behind them for ballast.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne steel bookend pair as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776692851023,"sku":"HMS-ACC-001-BK","price":25.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776692883791,"sku":"HMS-ACC-001-RS","price":25.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776692916559,"sku":"HMS-ACC-001-WH","price":25.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Steel_Bookend_Pair.jpg?v=1789050978"},{"product_id":"clip-on-shelf-bookend-pair","title":"Clip On Shelf Bookend Pair","description":"\u003cp\u003eBookends that clip to the shelf edge rather than sitting on it, so they hold a row without taking up any shelf length.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne clip on shelf bookend pair as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776692982095,"sku":"HMS-ACC-002-BK","price":21.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693014863,"sku":"HMS-ACC-002-RS","price":21.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693047631,"sku":"HMS-ACC-002-WH","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Clip_On_Shelf_Bookend_Pair.jpg?v=1789050310"},{"product_id":"shelf-divider-pack-of-four","title":"Shelf Divider Pack of Four","description":"\u003cp\u003eFour dividers that slot into the shelf clip channel, for splitting a long shelf into sections. Move them along the shelf without unloading it.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf divider pack of four as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693113167,"sku":"HMS-ACC-003-BK","price":31.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693145935,"sku":"HMS-ACC-003-RS","price":31.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693178703,"sku":"HMS-ACC-003-WH","price":31.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Divider_Pack_of_Four.jpg?v=1789050985"},{"product_id":"front-rail-for-open-shelves-900mm","title":"Front Rail for Open Shelves 900mm","description":"\u003cp\u003eA 6mm steel rail across the front of a shelf, which is what stops things walking off the front in a kitchen or a nursery.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne front rail for open shelves 900mm as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693277007,"sku":"HMS-ACC-004-BK","price":23.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693309775,"sku":"HMS-ACC-004-RS","price":23.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693342543,"sku":"HMS-ACC-004-WH","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Front_Rail_for_Open_Shelves_900mm.jpg?v=1789050817"},{"product_id":"front-rail-for-open-shelves-1200mm","title":"Front Rail for Open Shelves 1200mm","description":"\u003cp\u003eThe longer front rail, for a full bay.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne front rail for open shelves 1200mm as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693440847,"sku":"HMS-ACC-005-BK","price":28.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693473615,"sku":"HMS-ACC-005-RS","price":28.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693506383,"sku":"HMS-ACC-005-WH","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Front_Rail_for_Open_Shelves_1200mm.jpg?v=1789050847"},{"product_id":"utensil-rail-with-six-s-hooks-900mm","title":"Utensil Rail with Six S Hooks 900mm","description":"\u003cp\u003eA 25mm stainless rail with six hooks, mounted under a kitchen shelf so pans and utensils hang where you can reach them.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne utensil rail with six s hooks 900mm as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693539151,"sku":"HMS-ACC-006-BK","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693571919,"sku":"HMS-ACC-006-RS","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693604687,"sku":"HMS-ACC-006-WH","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Utensil_Rail_with_Six_S_Hooks_900mm.jpg?v=1789051036"},{"product_id":"coat-hook-rail-with-six-double-hooks","title":"Coat Hook Rail with Six Double Hooks","description":"\u003cp\u003eSix double hooks on a steel rail that hooks into the same uprights, for a boot room or a hallway.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne coat hook rail with six double hooks as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693702991,"sku":"HMS-ACC-007-BK","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693735759,"sku":"HMS-ACC-007-RS","price":43.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693768527,"sku":"HMS-ACC-007-WH","price":43.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Coat_Hook_Rail_with_Six_Double_Hooks.jpg?v=1789050362"},{"product_id":"hanging-rail-with-end-sockets-900mm","title":"Hanging Rail with End Sockets 900mm","description":"\u003cp\u003eA 25mm stainless hanging rail with sockets that hook into the uprights, so a shelf bay becomes a wardrobe bay.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne hanging rail with end sockets 900mm as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776693866831,"sku":"HMS-ACC-008-BK","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776693899599,"sku":"HMS-ACC-008-RS","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776693932367,"sku":"HMS-ACC-008-WH","price":33.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Hanging_Rail_with_End_Sockets_900mm.jpg?v=1789050851"}],"url":"https:\/\/homartshelfs.com\/collections\/under-100-pounds.oembed?page=2","provider":"Homart Shelfs","version":"1.0","type":"link"}