{"title":"Solid Iroko","description":"\u003cp\u003eDense, oily and naturally durable. Iroko takes damp better than most hardwoods, which makes it the sensible choice for a kitchen or a utility room.\u003c\/p\u003e","products":[{"product_id":"complete-wall-shelving-system-1500mm-wide-with-five-solid-iroko-shelves","title":"Complete Wall Shelving System 1500mm Wide with Five Solid Iroko Shelves","description":"\u003cp\u003eA whole wall of adjustable shelving in one box, sized for a chimney breast, a hallway or a narrow wall. Three uprights, five shelves and every bracket and fixing the wall needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide, 250mm deep, five shelves, uprights 1800mm tall\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: Three uprights at 750mm centres, maximum unsupported span 750mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch anywhere over the height of the upright, no tools and no new holes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelf depth: 250mm as standard, 200mm and 300mm available on request\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm, giving 56 shelf positions\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 7.5 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 61.5 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat in 2 cartons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid iroko, 1500mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003e15 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eFixing pack for masonry, with the plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA paper marking template for the upright centres\u003c\/li\u003e\n\u003cli\u003eA printed fitting sequence and a spacing guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776616698191,"sku":"HMS-CWS-007-BK","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776616730959,"sku":"HMS-CWS-007-RS","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776616763727,"sku":"HMS-CWS-007-WH","price":1349.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776616796495,"sku":"HMS-CWS-007-BR","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Complete_Wall_Shelving_System_1500mm_Wide_with_Five_Solid_Iroko_Shelves.jpg?v=1789050336"},{"product_id":"complete-wall-shelving-system-1800mm-wide-with-five-solid-iroko-shelves","title":"Complete Wall Shelving System 1800mm Wide with Five Solid Iroko Shelves","description":"\u003cp\u003eA whole wall of adjustable shelving in one box, sized for the wall between two windows or behind a sofa. Four uprights, five shelves and every bracket and fixing the wall needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 250mm deep, five shelves, uprights 1800mm tall\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: Four uprights at 600mm centres, maximum unsupported span 600mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch anywhere over the height of the upright, no tools and no new holes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelf depth: 250mm as standard, 200mm and 300mm available on request\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm, giving 56 shelf positions\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 9.0 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 74.9 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat in 2 cartons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid iroko, 1800mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003e20 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eFixing pack for masonry, with the plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA paper marking template for the upright centres\u003c\/li\u003e\n\u003cli\u003eA printed fitting sequence and a spacing guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776617812303,"sku":"HMS-CWS-014-BK","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776617845071,"sku":"HMS-CWS-014-RS","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776617877839,"sku":"HMS-CWS-014-WH","price":1674.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776617910607,"sku":"HMS-CWS-014-BR","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Complete_Wall_Shelving_System_1800mm_Wide_with_Five_Solid_Iroko_Shelves.jpg?v=1789050337"},{"product_id":"complete-wall-shelving-system-2400mm-wide-with-six-solid-iroko-shelves","title":"Complete Wall Shelving System 2400mm Wide with Six Solid Iroko Shelves","description":"\u003cp\u003eA whole wall of adjustable shelving in one box, sized for a full living room wall. Five uprights, six shelves and every bracket and fixing the wall needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 250mm deep, six shelves, uprights 1800mm tall\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 99kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: Five uprights at 600mm centres, maximum unsupported span 600mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch anywhere over the height of the upright, no tools and no new holes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelf depth: 250mm as standard, 200mm and 300mm available on request\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm, giving 56 shelf positions\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 115.1 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat in 3 cartons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in solid iroko, 2400mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003e30 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eFixing pack for masonry, with the plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA paper marking template for the upright centres\u003c\/li\u003e\n\u003cli\u003eA printed fitting sequence and a spacing guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776618795343,"sku":"HMS-CWS-021-BK","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776618828111,"sku":"HMS-CWS-021-RS","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776618860879,"sku":"HMS-CWS-021-WH","price":2549.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776618893647,"sku":"HMS-CWS-021-BR","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Complete_Wall_Shelving_System_2400mm_Wide_with_Six_Solid_Iroko_Shelves.jpg?v=1789050338"},{"product_id":"complete-wall-shelving-system-3000mm-wide-with-seven-solid-iroko-shelves","title":"Complete Wall Shelving System 3000mm Wide with Seven Solid Iroko Shelves","description":"\u003cp\u003eA whole wall of adjustable shelving in one box, sized for a long wall in a large room or a wide landing. Six uprights, seven shelves and every bracket and fixing the wall needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3000mm wide, 250mm deep, seven shelves, uprights 1800mm tall\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 124kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: Six uprights at 600mm centres, maximum unsupported span 600mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch anywhere over the height of the upright, no tools and no new holes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelf depth: 250mm as standard, 200mm and 300mm available on request\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm, giving 56 shelf positions\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.0 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 163.7 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat in 3 cartons\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSeven shelves in solid iroko, 3000mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003e42 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eFixing pack for masonry, with the plasterboard pack free on request\u003c\/li\u003e\n\u003cli\u003eA paper marking template for the upright centres\u003c\/li\u003e\n\u003cli\u003eA printed fitting sequence and a spacing guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776619712847,"sku":"HMS-CWS-027-BK","price":3649.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776619745615,"sku":"HMS-CWS-027-RS","price":3649.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776619778383,"sku":"HMS-CWS-027-WH","price":3649.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776619811151,"sku":"HMS-CWS-027-BR","price":3899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Complete_Wall_Shelving_System_3000mm_Wide_with_Seven_Solid_Iroko_Shelves.jpg?v=1789050338"},{"product_id":"whole-room-shelving-system-two-wall-configuration-in-solid-iroko","title":"Whole Room Shelving System Two Wall Configuration in Solid Iroko","description":"\u003cp\u003eShelving for a small room or a study, shelving on two adjacent walls, planned as one system rather than as separate walls. Shelf lines run continuously around every corner so the room reads as a whole.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2 walls at 1800mm wide, four shelves per wall, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres throughout, corner returns mitred on site\u003c\/li\u003e\n\u003cli\u003eAdjustability: every shelf moves on a 32mm pitch, so the room can be re planned in an evening\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003eCorner treatment: shelves butt at the corner, no visible bracket\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 122.8 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat on a pallet, kerbside\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e8 slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e8 shelves in solid iroko cut to the wall widths\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eCorner butt plates for every shelf line\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA room drawing with the upright centres marked, drawn to your dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776620630351,"sku":"HMS-WRS-007-BK","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776620663119,"sku":"HMS-WRS-007-RS","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776620695887,"sku":"HMS-WRS-007-WH","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776620728655,"sku":"HMS-WRS-007-BR","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Whole_Room_Shelving_System_Two_Wall_Configuration_in_Solid_Iroko.jpg?v=1789051030"},{"product_id":"whole-room-shelving-system-two-wall-deep-configuration-in-solid-iroko","title":"Whole Room Shelving System Two Wall Deep Configuration in Solid Iroko","description":"\u003cp\u003eShelving for a larger room with two long walls to shelve, planned as one system rather than as separate walls. Shelf lines run continuously around every corner so the room reads as a whole.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2 walls at 2400mm wide, four shelves per wall, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 99kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres throughout, corner returns mitred on site\u003c\/li\u003e\n\u003cli\u003eAdjustability: every shelf moves on a 32mm pitch, so the room can be re planned in an evening\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003eCorner treatment: shelves butt at the corner, no visible bracket\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 161.0 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat on a pallet, kerbside\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e10 slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e8 shelves in solid iroko cut to the wall widths\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eCorner butt plates for every shelf line\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA room drawing with the upright centres marked, drawn to your dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776621875535,"sku":"HMS-WRS-013-BK","price":3599.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776621908303,"sku":"HMS-WRS-013-RS","price":3599.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776621941071,"sku":"HMS-WRS-013-WH","price":3599.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776621973839,"sku":"HMS-WRS-013-BR","price":3849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Whole_Room_Shelving_System_Two_Wall_Deep_Configuration_in_Solid_Iroko.jpg?v=1789051034"},{"product_id":"whole-room-shelving-system-three-wall-configuration-in-solid-iroko","title":"Whole Room Shelving System Three Wall Configuration in Solid Iroko","description":"\u003cp\u003eShelving for a room shelved on three sides with the window wall left clear, planned as one system rather than as separate walls. Shelf lines run continuously around every corner so the room reads as a whole.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3 walls at 1500mm wide, four shelves per wall, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres throughout, corner returns mitred on site\u003c\/li\u003e\n\u003cli\u003eAdjustability: every shelf moves on a 32mm pitch, so the room can be re planned in an evening\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 18.0 linear metres\u003c\/li\u003e\n\u003cli\u003eCorner treatment: shelves butt at the corner, no visible bracket\u003c\/li\u003e\n\u003cli\u003eUpright height: 1800mm\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 149.8 kilograms\u003c\/li\u003e\n\u003cli\u003eDelivered flat on a pallet, kerbside\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e9 slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e12 shelves in solid iroko cut to the wall widths\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eCorner butt plates for every shelf line\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA room drawing with the upright centres marked, drawn to your dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776623087951,"sku":"HMS-WRS-019-BK","price":3324.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776623120719,"sku":"HMS-WRS-019-RS","price":3324.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776623153487,"sku":"HMS-WRS-019-WH","price":3324.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776623186255,"sku":"HMS-WRS-019-BR","price":3574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Whole_Room_Shelving_System_Three_Wall_Configuration_in_Solid_Iroko.jpg?v=1789051032"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 119.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid iroko, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625348943,"sku":"HMS-LIB-007-BK","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625381711,"sku":"HMS-LIB-007-RS","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625414479,"sku":"HMS-LIB-007-WH","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625447247,"sku":"HMS-LIB-007-BR","price":2874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Solid_Iroko.jpg?v=1789050857"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 99kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 155.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid iroko, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776626430287,"sku":"HMS-LIB-013-BK","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776626463055,"sku":"HMS-LIB-013-RS","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776626495823,"sku":"HMS-LIB-013-WH","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776626528591,"sku":"HMS-LIB-013-BR","price":3749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Solid_Iroko.jpg?v=1789050866"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 131.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid iroko, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627904847,"sku":"HMS-LIB-019-BK","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627937615,"sku":"HMS-LIB-019-RS","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627970383,"sku":"HMS-LIB-019-WH","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776628003151,"sku":"HMS-LIB-019-BR","price":3174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Solid_Iroko.jpg?v=1789050838"},{"product_id":"alcove-shelving-system-for-a-pair-of-alcoves-700mm-wide-in-solid-iroko","title":"Alcove Shelving System for a Pair of Alcoves 700mm Wide in Solid Iroko","description":"\u003cp\u003eBoth alcoves in one order, sized for a pair of narrow Victorian alcoves, with the shelf lines set to match across the chimney breast.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: two alcoves at 700mm wide, five shelves each, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: two uprights per alcove set 100mm in from each side wall\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, and both alcoves can be re set to match in minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelves supplied 30mm oversize on width so you can scribe them to the alcove, which is never square\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge are in the box\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 7.0 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 61.7 kilograms\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm on request for a shallow alcove\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e10 shelves in solid iroko, cut 30mm oversize for scribing\u003c\/li\u003e\n\u003cli\u003e20 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge\u003c\/li\u003e\n\u003cli\u003eA levelling string line for matching the shelf heights across the breast\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776630919503,"sku":"HMS-ALC-007-BK","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776630952271,"sku":"HMS-ALC-007-RS","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776630985039,"sku":"HMS-ALC-007-WH","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776631017807,"sku":"HMS-ALC-007-BR","price":1549.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"alcove-shelving-system-for-a-pair-of-alcoves-900mm-wide-in-solid-iroko","title":"Alcove Shelving System for a Pair of Alcoves 900mm Wide in Solid Iroko","description":"\u003cp\u003eBoth alcoves in one order, sized for a pair of standard alcoves either side of a chimney breast, with the shelf lines set to match across the chimney breast.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: two alcoves at 900mm wide, six shelves each, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: two uprights per alcove set 100mm in from each side wall\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, and both alcoves can be re set to match in minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelves supplied 30mm oversize on width so you can scribe them to the alcove, which is never square\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge are in the box\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 10.8 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 87.7 kilograms\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm on request for a shallow alcove\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e12 shelves in solid iroko, cut 30mm oversize for scribing\u003c\/li\u003e\n\u003cli\u003e24 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge\u003c\/li\u003e\n\u003cli\u003eA levelling string line for matching the shelf heights across the breast\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776632623439,"sku":"HMS-ALC-014-BK","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776632656207,"sku":"HMS-ALC-014-RS","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776632688975,"sku":"HMS-ALC-014-WH","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776632721743,"sku":"HMS-ALC-014-BR","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Alcove_Shelving_System_for_a_Pair_of_Alcoves_900mm_Wide_in_Solid_Iroko.jpg?v=1789050325"},{"product_id":"alcove-shelving-system-for-a-pair-of-alcoves-1100mm-wide-in-solid-iroko","title":"Alcove Shelving System for a Pair of Alcoves 1100mm Wide in Solid Iroko","description":"\u003cp\u003eBoth alcoves in one order, sized for a pair of wide alcoves in a nineteen thirties room, with the shelf lines set to match across the chimney breast.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: two alcoves at 1100mm wide, six shelves each, 250mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: two uprights per alcove set 100mm in from each side wall\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, and both alcoves can be re set to match in minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eShelves supplied 30mm oversize on width so you can scribe them to the alcove, which is never square\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge are in the box\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 13.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 103.5 kilograms\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm on request for a shallow alcove\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003e12 shelves in solid iroko, cut 30mm oversize for scribing\u003c\/li\u003e\n\u003cli\u003e24 shelf brackets, 250mm\u003c\/li\u003e\n\u003cli\u003eA scribing block and a pencil gauge\u003c\/li\u003e\n\u003cli\u003eA levelling string line for matching the shelf heights across the breast\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776633999695,"sku":"HMS-ALC-021-BK","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776634032463,"sku":"HMS-ALC-021-RS","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776634065231,"sku":"HMS-ALC-021-WH","price":2324.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776634097999,"sku":"HMS-ALC-021-BR","price":2474.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Alcove_Shelving_System_for_a_Pair_of_Alcoves_1100mm_Wide_in_Solid_Iroko.jpg?v=1789050318"},{"product_id":"kitchen-shelving-system-over-the-worktop-1800mm-wide-in-solid-iroko","title":"Kitchen Shelving System Over the Worktop 1800mm Wide in Solid Iroko","description":"\u003cp\u003eOpen shelving for the run above a worktop, set 500mm above it so a kettle and a food processor both fit underneath, with a rail, hooks and the deeper brackets a kitchen actually needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, three shelves, 300mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a food safe hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, 300mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, which matters more in a kitchen than anywhere else because the tallest thing on the shelf changes every year\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 300mm, which takes a dinner plate standing up\u003c\/li\u003e\n\u003cli\u003eFinish: food safe hardwax oil on the timber, wipeable\u003c\/li\u003e\n\u003cli\u003eIncludes a 1200mm utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eNot for directly above a hob without a 700mm clearance\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 5.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 51.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eThree shelves in solid iroko, 1800mm by 300mm by 30mm\u003c\/li\u003e\n\u003cli\u003e12 shelf brackets, 300mm\u003c\/li\u003e\n\u003cli\u003eOne 1200mm stainless utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eA tin of food safe hardwax oil for the cut ends\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776635015503,"sku":"HMS-KIT-003-BK","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776635048271,"sku":"HMS-KIT-003-RS","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776635081039,"sku":"HMS-KIT-003-WH","price":1174.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776635113807,"sku":"HMS-KIT-003-BR","price":1249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Kitchen_Shelving_System_Over_the_Worktop_1800mm_Wide_in_Solid_Iroko.jpg?v=1789050851"},{"product_id":"kitchen-shelving-system-full-kitchen-wall-2400mm-wide-in-solid-iroko","title":"Kitchen Shelving System Full Kitchen Wall 2400mm Wide in Solid Iroko","description":"\u003cp\u003eOpen shelving for a whole kitchen wall in place of upper cupboards, with a rail, hooks and the deeper brackets a kitchen actually needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, four shelves, 300mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a food safe hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 99kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, 300mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, which matters more in a kitchen than anywhere else because the tallest thing on the shelf changes every year\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 300mm, which takes a dinner plate standing up\u003c\/li\u003e\n\u003cli\u003eFinish: food safe hardwax oil on the timber, wipeable\u003c\/li\u003e\n\u003cli\u003eIncludes a 1200mm utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eNot for directly above a hob without a 700mm clearance\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 9.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 83.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in solid iroko, 2400mm by 300mm by 30mm\u003c\/li\u003e\n\u003cli\u003e20 shelf brackets, 300mm\u003c\/li\u003e\n\u003cli\u003eOne 1200mm stainless utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eA tin of food safe hardwax oil for the cut ends\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776636162383,"sku":"HMS-KIT-008-BK","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776636195151,"sku":"HMS-KIT-008-RS","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776636227919,"sku":"HMS-KIT-008-WH","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776636260687,"sku":"HMS-KIT-008-BR","price":2024.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"kitchen-shelving-system-pantry-and-larder-1200mm-wide-in-solid-iroko","title":"Kitchen Shelving System Pantry and Larder 1200mm Wide in Solid Iroko","description":"\u003cp\u003eOpen shelving for a pantry or a larder cupboard, shelved right up, with a rail, hooks and the deeper brackets a kitchen actually needs.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide, six shelves, 300mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a food safe hardwax oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, 300mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch, which matters more in a kitchen than anywhere else because the tallest thing on the shelf changes every year\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 300mm, which takes a dinner plate standing up\u003c\/li\u003e\n\u003cli\u003eFinish: food safe hardwax oil on the timber, wipeable\u003c\/li\u003e\n\u003cli\u003eIncludes a 1200mm utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eNot for directly above a hob without a 700mm clearance\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 7.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 62.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in solid iroko, 1200mm by 300mm by 30mm\u003c\/li\u003e\n\u003cli\u003e18 shelf brackets, 300mm\u003c\/li\u003e\n\u003cli\u003eOne 1200mm stainless utensil rail with six S hooks\u003c\/li\u003e\n\u003cli\u003eA tin of food safe hardwax oil for the cut ends\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776637276495,"sku":"HMS-KIT-013-BK","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776637309263,"sku":"HMS-KIT-013-RS","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776637342031,"sku":"HMS-KIT-013-WH","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776637374799,"sku":"HMS-KIT-013-BR","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Kitchen_Shelving_System_Pantry_and_Larder_1200mm_Wide_in_Solid_Iroko.jpg?v=1789050848"},{"product_id":"floating-shelf-set-of-four-in-solid-iroko-900mm-wide","title":"Floating Shelf Set of Four in Solid Iroko 900mm Wide","description":"\u003cp\u003eFour floating shelves at 900mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 2 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 43.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e8 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651071823,"sku":"HMS-FSS-005-BK","price":759.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776651104591,"sku":"HMS-FSS-005-RS","price":759.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776651137359,"sku":"HMS-FSS-005-WH","price":759.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Iroko_900mm_Wide.jpg?v=1789050364"},{"product_id":"floating-shelf-set-of-four-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Four in Solid Iroko 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 56.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651989327,"sku":"HMS-FSS-010-BK","price":969.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776652022095,"sku":"HMS-FSS-010-RS","price":969.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776652054863,"sku":"HMS-FSS-010-WH","price":969.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Iroko_1200mm_Wide.jpg?v=1789050364"},{"product_id":"floating-shelf-set-of-six-in-solid-iroko-900mm-wide","title":"Floating Shelf Set of Six in Solid Iroko 900mm Wide","description":"\u003cp\u003eSix floating shelves at 900mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 2 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 65.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776652874063,"sku":"HMS-FSS-015-BK","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776652906831,"sku":"HMS-FSS-015-RS","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776652939599,"sku":"HMS-FSS-015-WH","price":1149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Iroko_900mm_Wide.jpg?v=1789050357"},{"product_id":"floating-shelf-set-of-six-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Six in Solid Iroko 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 84.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653824335,"sku":"HMS-FSS-020-BK","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653857103,"sku":"HMS-FSS-020-RS","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653889871,"sku":"HMS-FSS-020-WH","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Iroko_1200mm_Wide.jpg?v=1789050357"},{"product_id":"floating-shelf-set-of-eight-in-solid-iroko-1000mm-wide","title":"Floating Shelf Set of Eight in Solid Iroko 1000mm Wide","description":"\u003cp\u003eEight floating shelves at 1000mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1000mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 95.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid iroko, 1000mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776654741839,"sku":"HMS-FSS-025-BK","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776654774607,"sku":"HMS-FSS-025-RS","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776654807375,"sku":"HMS-FSS-025-WH","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Eight_in_Solid_Iroko_1000mm_Wide.jpg?v=1789050351"},{"product_id":"floating-shelf-set-of-three-in-solid-iroko-1500mm-wide","title":"Floating Shelf Set of Three in Solid Iroko 1500mm Wide","description":"\u003cp\u003eThree floating shelves at 1500mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Three shelves, 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains three shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 51.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree shelves in solid iroko, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eThree welded steel frames\u003c\/li\u003e\n\u003cli\u003e9 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776656052559,"sku":"HMS-FSS-030-BK","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776656085327,"sku":"HMS-FSS-030-RS","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776656118095,"sku":"HMS-FSS-030-WH","price":889.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"floating-shelf-set-of-eight-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Eight in Solid Iroko 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 112.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776657035599,"sku":"HMS-FSS-035-BK","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776657068367,"sku":"HMS-FSS-035-RS","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776657101135,"sku":"HMS-FSS-035-WH","price":1949.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"floating-shelf-set-of-ten-in-solid-iroko-900mm-wide","title":"Floating Shelf Set of Ten in Solid Iroko 900mm Wide","description":"\u003cp\u003eTen floating shelves at 900mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Ten shelves, 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 2 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains ten shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 109.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTen shelves in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eTen welded steel frames\u003c\/li\u003e\n\u003cli\u003e20 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776657985871,"sku":"HMS-FSS-040-BK","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776658018639,"sku":"HMS-FSS-040-RS","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776658051407,"sku":"HMS-FSS-040-WH","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Ten_in_Solid_Iroko_900mm_Wide.jpg?v=1789050801"},{"product_id":"floating-shelf-set-of-twelve-in-solid-iroko-900mm-wide","title":"Floating Shelf Set of Twelve in Solid Iroko 900mm Wide","description":"\u003cp\u003eTwelve floating shelves at 900mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve shelves, 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 2 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains twelve shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 130.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve shelves in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eTwelve welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776658903375,"sku":"HMS-FSS-045-BK","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776658936143,"sku":"HMS-FSS-045-RS","price":2274.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776658968911,"sku":"HMS-FSS-045-WH","price":2274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Twelve_in_Solid_Iroko_900mm_Wide.jpg?v=1789050834"},{"product_id":"floating-shelf-set-of-six-in-solid-iroko-1500mm-wide","title":"Floating Shelf Set of Six in Solid Iroko 1500mm Wide","description":"\u003cp\u003eSix floating shelves at 1500mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 103.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid iroko, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776659886415,"sku":"HMS-FSS-050-BK","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776659919183,"sku":"HMS-FSS-050-RS","price":1774.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776659951951,"sku":"HMS-FSS-050-WH","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Iroko_1500mm_Wide.jpg?v=1789050365"},{"product_id":"utility-and-boot-room-shelving-system-boot-room-1500mm-wide-in-solid-iroko","title":"Utility and Boot Room Shelving System Boot Room 1500mm Wide in Solid Iroko","description":"\u003cp\u003eHard wearing open shelving for a boot room or a back hall, with a hanging rail under the shelves and a bench height ledge for taking boots off. Everything here is specified for a room that gets wet coats, muddy boots and damp washing rather than books.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide, three shelves, 350mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a moisture tolerant oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 750mm centres, 350mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on the 32mm pitch, and the rails move with them\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 350mm, which takes a laundry basket\u003c\/li\u003e\n\u003cli\u003eIncludes a 25mm stainless hanging rail the full width\u003c\/li\u003e\n\u003cli\u003eIncludes six double coat hooks on a rail\u003c\/li\u003e\n\u003cli\u003eSuitable for a humid room, not for a shower enclosure\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 4.5 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 43.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eThree shelves in solid iroko at 350mm deep\u003c\/li\u003e\n\u003cli\u003e9 shelf brackets, 350mm\u003c\/li\u003e\n\u003cli\u003eOne 1500mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eOne coat hook rail with six double hooks\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776672239951,"sku":"HMS-GEN-001-BK","price":989.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776672272719,"sku":"HMS-GEN-001-RS","price":989.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776672305487,"sku":"HMS-GEN-001-WH","price":989.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776672338255,"sku":"HMS-GEN-001-BR","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Utility_and_Boot_Room_Shelving_System_Boot_Room_1500mm_Wide_in_Solid_Iroko.jpg?v=1789051030"},{"product_id":"utility-and-boot-room-shelving-system-utility-and-laundry-1800mm-wide-in-solid-iroko","title":"Utility and Boot Room Shelving System Utility and Laundry 1800mm Wide in Solid Iroko","description":"\u003cp\u003eHard wearing open shelving for a utility room, with an airing rail under the lowest shelf and a deeper shelf for baskets. Everything here is specified for a room that gets wet coats, muddy boots and damp washing rather than books.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves, 350mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a moisture tolerant oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, 350mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on the 32mm pitch, and the rails move with them\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 350mm, which takes a laundry basket\u003c\/li\u003e\n\u003cli\u003eIncludes a 25mm stainless hanging rail the full width\u003c\/li\u003e\n\u003cli\u003eIncludes six double coat hooks on a rail\u003c\/li\u003e\n\u003cli\u003eSuitable for a humid room, not for a shower enclosure\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 7.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 65.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in solid iroko at 350mm deep\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 350mm\u003c\/li\u003e\n\u003cli\u003eOne 1800mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eOne coat hook rail with six double hooks\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776673288527,"sku":"HMS-GEN-006-BK","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776673321295,"sku":"HMS-GEN-006-RS","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776673354063,"sku":"HMS-GEN-006-WH","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776673386831,"sku":"HMS-GEN-006-BR","price":1599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Utility_and_Boot_Room_Shelving_System_Utility_and_Laundry_1800mm_Wide_in_Solid_Iroko.jpg?v=1789051034"},{"product_id":"utility-and-boot-room-shelving-system-under-stairs-1200mm-wide-in-solid-iroko","title":"Utility and Boot Room Shelving System Under Stairs 1200mm Wide in Solid Iroko","description":"\u003cp\u003eHard wearing open shelving for the awkward wall under a staircase, with the shelf lengths stepping down to follow the string. Everything here is specified for a room that gets wet coats, muddy boots and damp washing rather than books.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide, five shelves, 350mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber finished in a moisture tolerant oil\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, 350mm brackets\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on the 32mm pitch, and the rails move with them\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 350mm, which takes a laundry basket\u003c\/li\u003e\n\u003cli\u003eIncludes a 25mm stainless hanging rail the full width\u003c\/li\u003e\n\u003cli\u003eIncludes six double coat hooks on a rail\u003c\/li\u003e\n\u003cli\u003eSuitable for a humid room, not for a shower enclosure\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 6.0 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 54.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid iroko at 350mm deep\u003c\/li\u003e\n\u003cli\u003e15 shelf brackets, 350mm\u003c\/li\u003e\n\u003cli\u003eOne 1200mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eOne coat hook rail with six double hooks\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776674173263,"sku":"HMS-GEN-011-BK","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776674206031,"sku":"HMS-GEN-011-RS","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776674238799,"sku":"HMS-GEN-011-WH","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776674271567,"sku":"HMS-GEN-011-BR","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Utility_and_Boot_Room_Shelving_System_Under_Stairs_1200mm_Wide_in_Solid_Iroko.jpg?v=1789051010"},{"product_id":"floating-shelf-in-solid-iroko-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678924623,"sku":"HMS-FLS-007-BK","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678957391,"sku":"HMS-FLS-007-RS","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678990159,"sku":"HMS-FLS-007-WH","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_600mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-900mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679907663,"sku":"HMS-FLS-014-BK","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679940431,"sku":"HMS-FLS-014-RS","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679973199,"sku":"HMS-FLS-014-WH","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_900mm_Wide_by_200mm_Deep.jpg?v=1789050307"},{"product_id":"floating-shelf-in-solid-iroko-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680759631,"sku":"HMS-FLS-021-BK","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680792399,"sku":"HMS-FLS-021-RS","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680825167,"sku":"HMS-FLS-021-WH","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1200mm_Wide_by_200mm_Deep.jpg?v=1789050341"},{"product_id":"floating-shelf-in-solid-iroko-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681808207,"sku":"HMS-FLS-028-BK","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681840975,"sku":"HMS-FLS-028-RS","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681873743,"sku":"HMS-FLS-028-WH","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1500mm_Wide_by_200mm_Deep.jpg?v=1789050340"},{"product_id":"floating-shelf-in-solid-iroko-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 66kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682955087,"sku":"HMS-FLS-035-BK","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682987855,"sku":"HMS-FLS-035-RS","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683020623,"sku":"HMS-FLS-035-WH","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1800mm_Wide_by_200mm_Deep.jpg?v=1789050331"}],"url":"https:\/\/homartshelfs.com\/collections\/solid-iroko.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}