{"title":"Made to Measure","description":"\u003cp\u003eCut to your dimensions rather than ours. Send the width, depth and the load you are planning and we will specify it. Made-to-measure items are produced for you, so the 14-day change-of-mind right does not apply.\u003c\/p\u003e","products":[{"product_id":"made-to-measure-wall-system-up-to-2400mm-wide","title":"Made to Measure Wall System up to 2400mm Wide","description":"\u003cp\u003eYou send the wall dimensions and we cut every shelf to them. Walls are never the size you were told and almost never square, and a shelf cut to the actual opening looks built in rather than bought.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 34 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776670437711,"sku":"HMS-MTM-001-DEP","price":669.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776670470479,"sku":"HMS-MTM-001-FUL","price":1349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Wall_System_up_to_2400mm_Wide.jpg?v=1789050799"},{"product_id":"made-to-measure-wall-system-up-to-4000mm-wide","title":"Made to Measure Wall System up to 4000mm Wide","description":"\u003cp\u003eThe larger version, for a wall too long for a standard kit. Shelves are jointed with a concealed loose tongue where they exceed board length, which is invisible once fitted.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 52 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776670568783,"sku":"HMS-MTM-002-DEP","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776670601551,"sku":"HMS-MTM-002-FUL","price":2149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Wall_System_up_to_4000mm_Wide.jpg?v=1789050786"},{"product_id":"made-to-measure-alcove-system-for-a-pair-of-alcoves","title":"Made to Measure Alcove System for a Pair of Alcoves","description":"\u003cp\u003eBoth alcoves measured, cut and scribed to your walls. We ask for four measurements per alcove because they are never parallel and pretending otherwise is why most alcove shelving has a gap at the back.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 28 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776670699855,"sku":"HMS-MTM-003-DEP","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776670732623,"sku":"HMS-MTM-003-FUL","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Alcove_System_for_a_Pair_of_Alcoves.jpg?v=1789050812"},{"product_id":"made-to-measure-library-wall-up-to-3000mm-wide","title":"Made to Measure Library Wall up to 3000mm Wide","description":"\u003cp\u003eFloor to ceiling, cut to the actual ceiling height including the cornice, with a scribe strip so the uprights sit flat against a wavy wall.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 62 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776670830927,"sku":"HMS-MTM-004-DEP","price":1249.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776670863695,"sku":"HMS-MTM-004-FUL","price":2499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Library_Wall_up_to_3000mm_Wide.jpg?v=1789050844"},{"product_id":"made-to-measure-kitchen-shelving-up-to-2400mm-wide","title":"Made to Measure Kitchen Shelving up to 2400mm Wide","description":"\u003cp\u003eCut to fit between a wall unit and a window reveal, which is the situation no standard kit ever fits.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 26 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776671387983,"sku":"HMS-MTM-005-DEP","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776671420751,"sku":"HMS-MTM-005-FUL","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Kitchen_Shelving_up_to_2400mm_Wide.jpg?v=1789050842"},{"product_id":"made-to-measure-media-wall-up-to-3000mm-wide","title":"Made to Measure Media Wall up to 3000mm Wide","description":"\u003cp\u003ePlanned around your screen size, your sofa distance and where the aerial actually comes out of the wall.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 44 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776671519055,"sku":"HMS-MTM-006-DEP","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776671551823,"sku":"HMS-MTM-006-FUL","price":1799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Media_Wall_up_to_3000mm_Wide.jpg?v=1789050821"},{"product_id":"made-to-measure-home-office-wall-up-to-2400mm-wide","title":"Made to Measure Home Office Wall up to 2400mm Wide","description":"\u003cp\u003eDesk height set to your chair and your height rather than to a standard, which is the one measurement that most affects whether you can work at it all day.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 32 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776671682895,"sku":"HMS-MTM-007-DEP","price":719.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776671715663,"sku":"HMS-MTM-007-FUL","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Home_Office_Wall_up_to_2400mm_Wide.jpg?v=1789050843"},{"product_id":"made-to-measure-dressing-room-up-to-3600mm-wide","title":"Made to Measure Dressing Room up to 3600mm Wide","description":"\u003cp\u003eMeasured, drawn and cut for the room, with the hanging heights set to what you actually own rather than to an average wardrobe.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 54 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776671813967,"sku":"HMS-MTM-008-DEP","price":1149.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776671846735,"sku":"HMS-MTM-008-FUL","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Dressing_Room_up_to_3600mm_Wide.jpg?v=1789050805"},{"product_id":"made-to-measure-curved-or-angled-wall-system","title":"Made to Measure Curved or Angled Wall System","description":"\u003cp\u003eFor a bay window, a chimney breast with splayed returns or a wall that is not a straight line. Shelves cut to a template you send us.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 40 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776671945039,"sku":"HMS-MTM-009-DEP","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776671977807,"sku":"HMS-MTM-009-FUL","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Curved_or_Angled_Wall_System.jpg?v=1789050842"},{"product_id":"made-to-measure-retail-fit-out-per-bay","title":"Made to Measure Retail Fit Out per Bay","description":"\u003cp\u003ePriced per bay for a shop fit, with a load certificate, a fixing schedule and a drawing for the landlord.\u003c\/p\u003e\u003cp\u003eMade to measure runs to a fixed sequence so nobody is guessing. You send measurements on our form, we send a drawing, you check it and sign it, and only then does anything get cut. Payment is half at order and half before dispatch. If the drawing is wrong because we misread your measurements we remake it at our cost, and if it is wrong because the measurements were wrong we will remake it at material cost, which is about a third of the price. Nobody enjoys that conversation, so the measuring guide is worth ten minutes.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: cut to your dimensions, within the size limit in the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: any material in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eFinish: any hardware finish in the range, chosen at order\u003c\/li\u003e\n\u003cli\u003eLoad rating: as the equivalent standard system, stated on your drawing\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres unless the wall dictates otherwise\u003c\/li\u003e\n\u003cli\u003eAdjustability: fully adjustable on the 32mm pitch, exactly as the standard systems\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eLead time: 3 to 4 weeks from drawing approval\u003c\/li\u003e\n\u003cli\u003eDrawing: issued for your approval before anything is cut\u003c\/li\u003e\n\u003cli\u003ePayment: 50 per cent at order, balance before dispatch\u003c\/li\u003e\n\u003cli\u003eTolerance: shelves cut to plus nothing minus 2mm, then scribed on site\u003c\/li\u003e\n\u003cli\u003eApproximate packed weight: 24 kilograms\u003c\/li\u003e\n\u003cli\u003eMade to measure items are exempt from the 14 day cancellation right once cutting has begun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEvery component cut to your drawing\u003c\/li\u003e\n\u003cli\u003eA copy of the approved drawing with each component labelled\u003c\/li\u003e\n\u003cli\u003eScribe strips where the design needs them\u003c\/li\u003e\n\u003cli\u003eFixing packs for the wall types you tell us about\u003c\/li\u003e\n\u003cli\u003eA measuring guide, sent before you order rather than after\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Deposit, 50 per cent at order","offer_id":58776672108879,"sku":"HMS-MTM-010-DEP","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Paid in full at order","offer_id":58776672141647,"sku":"HMS-MTM-010-FUL","price":1099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Made_to_Measure_Retail_Fit_Out_per_Bay.jpg?v=1789050832"}],"url":"https:\/\/homartshelfs.com\/collections\/made-to-measure.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}