{"title":"Library and Floor to Ceiling","description":"\u003cp\u003eFull-height shelving built for the load books actually put on it. A metre of hardbacks is 15 to 30kg, so these runs are supported every 400 to 600mm and rated accordingly.\u003c\/p\u003e","products":[{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-solid-oak","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Solid Oak","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 73kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 113.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid oak, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776624267599,"sku":"HMS-LIB-001-BK","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776624300367,"sku":"HMS-LIB-001-RS","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776624333135,"sku":"HMS-LIB-001-WH","price":2474.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776624365903,"sku":"HMS-LIB-001-BR","price":2649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Solid_Oak.jpg?v=1789050824"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-solid-walnut","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Solid Walnut","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 73kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 110.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid walnut, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776624464207,"sku":"HMS-LIB-002-BK","price":3349.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776624496975,"sku":"HMS-LIB-002-RS","price":3349.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776624529743,"sku":"HMS-LIB-002-WH","price":3349.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776624562511,"sku":"HMS-LIB-002-BR","price":3574.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Solid_Walnut.jpg?v=1789050835"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-solid-ash","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Solid Ash","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 68kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 104.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid ash, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776624628047,"sku":"HMS-LIB-003-BK","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776624660815,"sku":"HMS-LIB-003-RS","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776624693583,"sku":"HMS-LIB-003-WH","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776624726351,"sku":"HMS-LIB-003-BR","price":2349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Solid_Ash.jpg?v=1789050826"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-birch-plywood","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Birch Plywood","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 101.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in birch plywood, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776624824655,"sku":"HMS-LIB-004-BK","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776624857423,"sku":"HMS-LIB-004-RS","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776624890191,"sku":"HMS-LIB-004-WH","price":1849.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776624922959,"sku":"HMS-LIB-004-BR","price":1974.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Birch_Plywood.jpg?v=1789050834"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-painted-mdf","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Painted MDF","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 57kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 130.7 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in painted mdf, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776624988495,"sku":"HMS-LIB-005-BK","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625021263,"sku":"HMS-LIB-005-RS","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625054031,"sku":"HMS-LIB-005-WH","price":1724.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625086799,"sku":"HMS-LIB-005-BR","price":1849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Painted_MDF.jpg?v=1789050858"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-powder-coated-steel","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Powder Coated Steel","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 89kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 96.1 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in powder coated steel, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625185103,"sku":"HMS-LIB-006-BK","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625217871,"sku":"HMS-LIB-006-RS","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625250639,"sku":"HMS-LIB-006-WH","price":1999.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625283407,"sku":"HMS-LIB-006-BR","price":2124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Powder_Coated_Steel.jpg?v=1789050845"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2400mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2400mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wall up to a standard 2.4 metre ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 14.4 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 119.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid iroko, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e32 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625348943,"sku":"HMS-LIB-007-BK","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625381711,"sku":"HMS-LIB-007-RS","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625414479,"sku":"HMS-LIB-007-WH","price":2674.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625447247,"sku":"HMS-LIB-007-BR","price":2874.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2400mm_High_in_Solid_Iroko.jpg?v=1789050857"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-solid-oak","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Solid Oak","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 97kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 147.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid oak, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625545551,"sku":"HMS-LIB-008-BK","price":3224.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625578319,"sku":"HMS-LIB-008-RS","price":3224.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625611087,"sku":"HMS-LIB-008-WH","price":3224.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625643855,"sku":"HMS-LIB-008-BR","price":3449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Solid_Oak.jpg?v=1789050824"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-solid-ash","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Solid Ash","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 91kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 135.8 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid ash, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625709391,"sku":"HMS-LIB-009-BK","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625742159,"sku":"HMS-LIB-009-RS","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625774927,"sku":"HMS-LIB-009-WH","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776625807695,"sku":"HMS-LIB-009-BR","price":3049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Solid_Ash.jpg?v=1789050826"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-birch-plywood","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Birch Plywood","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 82kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 132.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in birch plywood, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776625905999,"sku":"HMS-LIB-010-BK","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776625938767,"sku":"HMS-LIB-010-RS","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776625971535,"sku":"HMS-LIB-010-WH","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776626004303,"sku":"HMS-LIB-010-BR","price":2549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Birch_Plywood.jpg?v=1789050854"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-painted-mdf","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Painted MDF","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 76kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 170.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in painted mdf, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776626069839,"sku":"HMS-LIB-011-BK","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776626102607,"sku":"HMS-LIB-011-RS","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776626135375,"sku":"HMS-LIB-011-WH","price":2224.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776626168143,"sku":"HMS-LIB-011-BR","price":2399.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Painted_MDF.jpg?v=1789050846"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-powder-coated-steel","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Powder Coated Steel","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 119kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 124.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in powder coated steel, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776626266447,"sku":"HMS-LIB-012-BK","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776626299215,"sku":"HMS-LIB-012-RS","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776626331983,"sku":"HMS-LIB-012-WH","price":2574.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776626364751,"sku":"HMS-LIB-012-BR","price":2749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Powder_Coated_Steel.jpg?v=1789050846"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2400mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2400mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall up to a standard ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2400mm high, 280mm deep, eight shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 99kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 19.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 155.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2400mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eEight shelves in solid iroko, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e40 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776626430287,"sku":"HMS-LIB-013-BK","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776626463055,"sku":"HMS-LIB-013-RS","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776626495823,"sku":"HMS-LIB-013-WH","price":3499.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776626528591,"sku":"HMS-LIB-013-BR","price":3749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2400mm_High_in_Solid_Iroko.jpg?v=1789050866"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-solid-oak","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Solid Oak","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 73kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 125.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid oak, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776626987343,"sku":"HMS-LIB-014-BK","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627020111,"sku":"HMS-LIB-014-RS","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627052879,"sku":"HMS-LIB-014-WH","price":2749.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776627085647,"sku":"HMS-LIB-014-BR","price":2949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Solid_Oak.jpg?v=1789050864"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-solid-ash","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Solid Ash","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 68kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 115.7 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid ash, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627151183,"sku":"HMS-LIB-015-BK","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627183951,"sku":"HMS-LIB-015-RS","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627216719,"sku":"HMS-LIB-015-WH","price":2424.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776627249487,"sku":"HMS-LIB-015-BR","price":2599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Solid_Ash.jpg?v=1789050850"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-birch-plywood","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Birch Plywood","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 62kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 112.5 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in birch plywood, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627347791,"sku":"HMS-LIB-016-BK","price":2024.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627380559,"sku":"HMS-LIB-016-RS","price":2024.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627413327,"sku":"HMS-LIB-016-WH","price":2024.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776627446095,"sku":"HMS-LIB-016-BR","price":2174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Birch_Plywood.jpg?v=1789050836"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-painted-mdf","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Painted MDF","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 57kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 144.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in painted mdf, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627544399,"sku":"HMS-LIB-017-BK","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627577167,"sku":"HMS-LIB-017-RS","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627609935,"sku":"HMS-LIB-017-WH","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776627642703,"sku":"HMS-LIB-017-BR","price":2049.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-powder-coated-steel","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Powder Coated Steel","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 89kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 106.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in powder coated steel, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627708239,"sku":"HMS-LIB-018-BK","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627741007,"sku":"HMS-LIB-018-RS","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627773775,"sku":"HMS-LIB-018-WH","price":2199.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776627806543,"sku":"HMS-LIB-018-BR","price":2349.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Powder_Coated_Steel.jpg?v=1789050764"},{"product_id":"floor-to-ceiling-library-shelving-system-1800mm-wide-by-2700mm-high-in-solid-iroko","title":"Floor to Ceiling Library Shelving System 1800mm Wide by 2700mm High in Solid Iroko","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a Victorian room with a high ceiling. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 30mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 75kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 16.2 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 131.9 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid iroko, 1800mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFour top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776627904847,"sku":"HMS-LIB-019-BK","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776627937615,"sku":"HMS-LIB-019-RS","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776627970383,"sku":"HMS-LIB-019-WH","price":2974.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776628003151,"sku":"HMS-LIB-019-BR","price":3174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_1800mm_Wide_by_2700mm_High_in_Solid_Iroko.jpg?v=1789050838"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2700mm-high-in-solid-oak","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2700mm High in Solid Oak","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall in a high ceilinged room. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 97kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 163.3 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid oak, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e45 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776628068687,"sku":"HMS-LIB-020-BK","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776628101455,"sku":"HMS-LIB-020-RS","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776628134223,"sku":"HMS-LIB-020-WH","price":3574.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776628166991,"sku":"HMS-LIB-020-BR","price":3824.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2700mm_High_in_Solid_Oak.jpg?v=1789050825"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2700mm-high-in-solid-ash","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2700mm High in Solid Ash","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall in a high ceilinged room. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 91kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 150.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in solid ash, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e45 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776628265295,"sku":"HMS-LIB-021-BK","price":3149.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776628298063,"sku":"HMS-LIB-021-RS","price":3149.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776628330831,"sku":"HMS-LIB-021-WH","price":3149.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776628363599,"sku":"HMS-LIB-021-BR","price":3374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2700mm_High_in_Solid_Ash.jpg?v=1789050846"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2700mm-high-in-birch-plywood","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2700mm High in Birch Plywood","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall in a high ceilinged room. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 82kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 146.0 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in birch plywood, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e45 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776628789583,"sku":"HMS-LIB-022-BK","price":2624.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776628822351,"sku":"HMS-LIB-022-RS","price":2624.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776628855119,"sku":"HMS-LIB-022-WH","price":2624.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776628887887,"sku":"HMS-LIB-022-BR","price":2799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2700mm_High_in_Birch_Plywood.jpg?v=1789050861"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2700mm-high-in-painted-mdf","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2700mm High in Painted MDF","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall in a high ceilinged room. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 76kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 189.2 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in painted mdf, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e45 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776628986191,"sku":"HMS-LIB-023-BK","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776629018959,"sku":"HMS-LIB-023-RS","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776629051727,"sku":"HMS-LIB-023-WH","price":2449.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776629084495,"sku":"HMS-LIB-023-BR","price":2624.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2700mm_High_in_Painted_MDF.jpg?v=1789050834"},{"product_id":"floor-to-ceiling-library-shelving-system-2400mm-wide-by-2700mm-high-in-powder-coated-steel","title":"Floor to Ceiling Library Shelving System 2400mm Wide by 2700mm High in Powder Coated Steel","description":"\u003cp\u003eShelving that runs from skirting to cornice, for a wide wall in a high ceilinged room. Nine tenths of a wall of books in a footprint of 280mm.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, 2700mm high, 280mm deep, nine shelves\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 119kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, floor mounted and top fixed\u003c\/li\u003e\n\u003cli\u003eAdjustability: shelves move on a 32mm pitch over the full height, so the bottom bay can take folios and the top can take paperbacks\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 280mm, which takes a hardback face on and an art book flat\u003c\/li\u003e\n\u003cli\u003eFeet: adjustable, with 25mm of travel for an uneven floor\u003c\/li\u003e\n\u003cli\u003eTop fixing: a restraint bracket at every upright, required by the regulations and by common sense\u003c\/li\u003e\n\u003cli\u003eTotal shelf run: 21.6 linear metres\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 137.4 kilograms\u003c\/li\u003e\n\u003cli\u003eLadder rail available as an accessory\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 2700mm, with adjustable feet\u003c\/li\u003e\n\u003cli\u003eNine shelves in powder coated steel, 2400mm by 280mm by 30mm\u003c\/li\u003e\n\u003cli\u003e45 shelf brackets, 280mm\u003c\/li\u003e\n\u003cli\u003eFive top restraint brackets\u003c\/li\u003e\n\u003cli\u003eA skirting scribe strip so the uprights sit flat against the wall\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003cli\u003eA setting out drawing and a printed fitting sequence\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776629150031,"sku":"HMS-LIB-024-BK","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776629182799,"sku":"HMS-LIB-024-RS","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776629215567,"sku":"HMS-LIB-024-WH","price":2849.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776629248335,"sku":"HMS-LIB-024-BR","price":3049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floor_to_Ceiling_Library_Shelving_System_2400mm_Wide_by_2700mm_High_in_Powder_Coated_Steel.jpg?v=1789050815"},{"product_id":"ladder-rail-and-rolling-ladder-bracket-set","title":"Ladder Rail and Rolling Ladder Bracket Set","description":"\u003cp\u003eThe rail and the top brackets for a rolling library ladder, up to 3 metres. The ladder itself is a separate order because most people already have one or want a specific timber.\u003c\/p\u003e\u003cp\u003eAccessories hook into the same uprights and the same 32mm pitch as everything else, which is the whole argument for a track system. Nothing here needs a new hole in the wall and nothing here is fixed where you first put it. If you decide in a year that the utensil rail should be a shelf lower, it takes a minute.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: steel, stainless steel or aluminium depending on the item\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated or brushed as described\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the item, and generous in every case\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: hooks into any 32mm pitch upright, or clips to the shelf edge\u003c\/li\u003e\n\u003cli\u003eAdjustability: moves with the shelf, no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable unless the item fixes directly to the wall\u003c\/li\u003e\n\u003cli\u003eCompatible with every system in the range\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright from another maker\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold as described in the product name\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne ladder rail and rolling ladder bracket set as described\u003c\/li\u003e\n\u003cli\u003eHooks, clips or fixings as the item needs\u003c\/li\u003e\n\u003cli\u003eA fitting note where it is not obvious\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776695439695,"sku":"HMS-ACC-018-BK","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776695472463,"sku":"HMS-ACC-018-RS","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776695505231,"sku":"HMS-ACC-018-WH","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Ladder_Rail_and_Rolling_Ladder_Bracket_Set.jpg?v=1789050812"}],"url":"https:\/\/homartshelfs.com\/collections\/library-shelving.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}