{"title":"Fixings and Installation","description":"\u003cp\u003eThe right anchor for your wall. Masonry plugs, aerated-block fixings, metal spring toggles for plasterboard and long kits for dot-and-dab. If you are not sure which you need, read the \u003ca href=\"\/pages\/load-ratings-and-fixings\"\u003efixings guide\u003c\/a\u003e first.\u003c\/p\u003e","products":[{"product_id":"masonry-fixing-kit-for-four-uprights","title":"Masonry Fixing Kit for Four Uprights","description":"\u003cp\u003eTwenty four stainless screws and nylon plugs sized for brick and dense block, which is what most of these walls actually are.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne masonry fixing kit for four uprights as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776695570767,"sku":"HMS-FIX-001","price":15.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Masonry_Fixing_Kit_for_Four_Uprights.jpg?v=1789050813"},{"product_id":"plasterboard-on-dabs-fixing-kit-for-four-uprights","title":"Plasterboard on Dabs Fixing Kit for Four Uprights","description":"\u003cp\u003eLong screws and expanding metal anchors that reach through the void to the block behind. This is the wall that catches people out and the kit is free with any system if you ask.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne plasterboard on dabs fixing kit for four uprights as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776695800143,"sku":"HMS-FIX-002","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Plasterboard_on_Dabs_Fixing_Kit_for_Four_Uprights.jpg?v=1789050973"},{"product_id":"timber-stud-fixing-kit-for-four-uprights","title":"Timber Stud Fixing Kit for Four Uprights","description":"\u003cp\u003eTwenty four 80mm structural screws, no plugs, for going straight into studs at 400 or 600mm centres.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne timber stud fixing kit for four uprights as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776695931215,"sku":"HMS-FIX-003","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Timber_Stud_Fixing_Kit_for_Four_Uprights.jpg?v=1789051032"},{"product_id":"metal-stud-fixing-kit-for-four-uprights","title":"Metal Stud Fixing Kit for Four Uprights","description":"\u003cp\u003eToggle anchors sized for a metal stud partition, which will not take an ordinary plasterboard plug under a shelf load.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne metal stud fixing kit for four uprights as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776695996751,"sku":"HMS-FIX-004","price":25.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Metal_Stud_Fixing_Kit_for_Four_Uprights.jpg?v=1789050863"},{"product_id":"heavy-duty-sleeve-anchor-set","title":"Heavy Duty Sleeve Anchor Set","description":"\u003cp\u003eTwelve M8 sleeve anchors for a workshop, a garage or a retail bay, where a plug and a screw is not enough.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne heavy duty sleeve anchor set as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696095055,"sku":"HMS-FIX-005","price":21.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Heavy_Duty_Sleeve_Anchor_Set.jpg?v=1789050797"},{"product_id":"stud-detector-and-marking-set","title":"Stud Detector and Marking Set","description":"\u003cp\u003eA stud detector, a 2 metre marking tape, a pencil and a roll of low tack tape for marking a wall without leaving pencil on the paint.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne stud detector and marking set as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696160591,"sku":"HMS-FIX-006","price":33.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"spirit-level-600mm-with-a-magnetic-edge","title":"Spirit Level 600mm with a Magnetic Edge","description":"\u003cp\u003eA 600mm level that sticks to the upright while you fix it, which frees the hand you need for the screwdriver.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne spirit level 600mm with a magnetic edge as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696193359,"sku":"HMS-FIX-007","price":27.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Spirit_Level_600mm_with_a_Magnetic_Edge.jpg?v=1789050967"},{"product_id":"long-reach-paper-template-set","title":"Long Reach Paper Template Set","description":"\u003cp\u003eFull length paper templates for the common upright spacings, so you mark the wall from one piece of paper rather than from a tape measure eight times.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne long reach paper template set as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696258895,"sku":"HMS-FIX-008","price":11.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Long_Reach_Paper_Template_Set.jpg?v=1789050769"},{"product_id":"wall-scribe-strip-pack-of-two","title":"Wall Scribe Strip Pack of Two","description":"\u003cp\u003eTwo timber scribe strips for a wall that is not flat, which is most walls in an old house. Plane them back to the wall line and the upright sits true.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne wall scribe strip pack of two as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696324431,"sku":"HMS-FIX-009","price":23.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Wall_Scribe_Strip_Pack_of_Two.jpg?v=1789051014"},{"product_id":"shelf-clip-pack-of-twenty","title":"Shelf Clip Pack of Twenty","description":"\u003cp\u003eTwenty replacement shelf clips, the small part that stops a board sliding forward and the small part that gets lost in a house move.\u003c\/p\u003e\u003cp\u003eFixings decide whether shelving stays on the wall, and the wall decides the fixing. Brick and dense block take a plug and a screw. Timber stud takes a structural screw straight in. Plasterboard on dabs needs something long enough to reach the block behind, and metal stud needs a toggle. If you are not sure what you have, drill a 3mm hole somewhere it will not show and look at the dust. Red is brick, grey is block, white and fluffy is plasterboard.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: see the product name\u003c\/li\u003e\n\u003cli\u003eMaterial: stainless steel, nylon or zinc plated as appropriate\u003c\/li\u003e\n\u003cli\u003eFinish: as supplied\u003c\/li\u003e\n\u003cli\u003eLoad rating: stated on the pack for the wall type it suits\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: sized for uprights at 600mm centres\u003c\/li\u003e\n\u003cli\u003eAdjustability: not applicable\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: this is the fixing kit itself\u003c\/li\u003e\n\u003cli\u003eCovers four uprights at 1800mm unless the name says otherwise\u003c\/li\u003e\n\u003cli\u003eFree with any complete system if you tell us your wall type\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf clip pack of twenty as described\u003c\/li\u003e\n\u003cli\u003eA wall identification card\u003c\/li\u003e\n\u003cli\u003eA drilling and torque guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Default Title","offer_id":58776696389967,"sku":"HMS-FIX-010","price":13.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Clip_Pack_of_Twenty.jpg?v=1789050954"}],"url":"https:\/\/homartshelfs.com\/collections\/fixings.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}