{"title":"Bedroom and Dressing Room","description":"\u003cp\u003eOpen wardrobe systems, shelf runs above a bed and dressing-room walls. Hanging rails and folded stacks put more weight on a shelf than people expect, so these are rated for it.\u003c\/p\u003e","products":[{"product_id":"open-wardrobe-and-dressing-room-system-single-wall-1800mm-wide-in-solid-oak","title":"Open Wardrobe and Dressing Room System Single Wall 1800mm Wide in Solid Oak","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for one wall of an open wardrobe, hanging rail and shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 73kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 2.7 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 65.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in solid oak at 400mm deep\u003c\/li\u003e\n\u003cli\u003e2.7 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776644321615,"sku":"HMS-DRS-001-BK","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776644354383,"sku":"HMS-DRS-001-RS","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776644387151,"sku":"HMS-DRS-001-WH","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776644419919,"sku":"HMS-DRS-001-BR","price":1549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Single_Wall_1800mm_Wide_in_Solid_Oak.jpg?v=1789050862"},{"product_id":"open-wardrobe-and-dressing-room-system-single-wall-1800mm-wide-in-solid-ash","title":"Open Wardrobe and Dressing Room System Single Wall 1800mm Wide in Solid Ash","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for one wall of an open wardrobe, hanging rail and shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 68kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 2.7 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 60.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in solid ash at 400mm deep\u003c\/li\u003e\n\u003cli\u003e2.7 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776644550991,"sku":"HMS-DRS-002-BK","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776644583759,"sku":"HMS-DRS-002-RS","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776644616527,"sku":"HMS-DRS-002-WH","price":1299.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776644649295,"sku":"HMS-DRS-002-BR","price":1374.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Single_Wall_1800mm_Wide_in_Solid_Ash.jpg?v=1789050859"},{"product_id":"open-wardrobe-and-dressing-room-system-single-wall-1800mm-wide-in-painted-mdf","title":"Open Wardrobe and Dressing Room System Single Wall 1800mm Wide in Painted MDF","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for one wall of an open wardrobe, hanging rail and shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 57kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 2.7 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 73.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in painted mdf at 400mm deep\u003c\/li\u003e\n\u003cli\u003e2.7 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776644747599,"sku":"HMS-DRS-003-BK","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776644780367,"sku":"HMS-DRS-003-RS","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776644813135,"sku":"HMS-DRS-003-WH","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776644845903,"sku":"HMS-DRS-003-BR","price":1149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Single_Wall_1800mm_Wide_in_Painted_MDF.jpg?v=1789050865"},{"product_id":"open-wardrobe-and-dressing-room-system-single-wall-1800mm-wide-in-birch-plywood","title":"Open Wardrobe and Dressing Room System Single Wall 1800mm Wide in Birch Plywood","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for one wall of an open wardrobe, hanging rail and shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 62kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 2.7 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 59.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in birch plywood at 400mm deep\u003c\/li\u003e\n\u003cli\u003e2.7 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776644976975,"sku":"HMS-DRS-004-BK","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776645009743,"sku":"HMS-DRS-004-RS","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776645042511,"sku":"HMS-DRS-004-WH","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776645075279,"sku":"HMS-DRS-004-BR","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Single_Wall_1800mm_Wide_in_Birch_Plywood.jpg?v=1789050864"},{"product_id":"open-wardrobe-and-dressing-room-system-single-wall-1800mm-wide-in-solid-walnut","title":"Open Wardrobe and Dressing Room System Single Wall 1800mm Wide in Solid Walnut","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for one wall of an open wardrobe, hanging rail and shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide, four shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 73kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 2.7 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 63.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFour shelves in solid walnut at 400mm deep\u003c\/li\u003e\n\u003cli\u003e2.7 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e16 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776645173583,"sku":"HMS-DRS-005-BK","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776645206351,"sku":"HMS-DRS-005-RS","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776645239119,"sku":"HMS-DRS-005-WH","price":1874.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776645271887,"sku":"HMS-DRS-005-BR","price":1999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Single_Wall_1800mm_Wide_in_Solid_Walnut.jpg?v=1789050864"},{"product_id":"open-wardrobe-and-dressing-room-system-corner-2400mm-wide-in-solid-oak","title":"Open Wardrobe and Dressing Room System Corner 2400mm Wide in Solid Oak","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a corner run with two hanging sections and shoe shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, five shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 97kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 3.6 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 99.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid oak at 400mm deep\u003c\/li\u003e\n\u003cli\u003e3.6 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e25 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776645370191,"sku":"HMS-DRS-006-BK","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776645402959,"sku":"HMS-DRS-006-RS","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776645435727,"sku":"HMS-DRS-006-WH","price":2174.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776645468495,"sku":"HMS-DRS-006-BR","price":2324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Corner_2400mm_Wide_in_Solid_Oak.jpg?v=1789050864"},{"product_id":"open-wardrobe-and-dressing-room-system-corner-2400mm-wide-in-solid-ash","title":"Open Wardrobe and Dressing Room System Corner 2400mm Wide in Solid Ash","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a corner run with two hanging sections and shoe shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, five shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 91kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 3.6 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 92.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid ash at 400mm deep\u003c\/li\u003e\n\u003cli\u003e3.6 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e25 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776645599567,"sku":"HMS-DRS-007-BK","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776645632335,"sku":"HMS-DRS-007-RS","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776645665103,"sku":"HMS-DRS-007-WH","price":1924.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776645697871,"sku":"HMS-DRS-007-BR","price":2074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Corner_2400mm_Wide_in_Solid_Ash.jpg?v=1789050860"},{"product_id":"open-wardrobe-and-dressing-room-system-corner-2400mm-wide-in-painted-mdf","title":"Open Wardrobe and Dressing Room System Corner 2400mm Wide in Painted MDF","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a corner run with two hanging sections and shoe shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, five shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 76kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 3.6 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 113.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in painted mdf at 400mm deep\u003c\/li\u003e\n\u003cli\u003e3.6 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e25 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776645796175,"sku":"HMS-DRS-008-BK","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776645828943,"sku":"HMS-DRS-008-RS","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776645861711,"sku":"HMS-DRS-008-WH","price":1549.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776645894479,"sku":"HMS-DRS-008-BR","price":1649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Corner_2400mm_Wide_in_Painted_MDF.jpg?v=1789050856"},{"product_id":"open-wardrobe-and-dressing-room-system-corner-2400mm-wide-in-birch-plywood","title":"Open Wardrobe and Dressing Room System Corner 2400mm Wide in Birch Plywood","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a corner run with two hanging sections and shoe shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, five shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 82kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 3.6 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 89.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in birch plywood at 400mm deep\u003c\/li\u003e\n\u003cli\u003e3.6 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e25 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776646025551,"sku":"HMS-DRS-009-BK","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776646058319,"sku":"HMS-DRS-009-RS","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776646091087,"sku":"HMS-DRS-009-WH","price":1649.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776646123855,"sku":"HMS-DRS-009-BR","price":1774.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Corner_2400mm_Wide_in_Birch_Plywood.jpg?v=1789050864"},{"product_id":"open-wardrobe-and-dressing-room-system-corner-2400mm-wide-in-solid-walnut","title":"Open Wardrobe and Dressing Room System Corner 2400mm Wide in Solid Walnut","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a corner run with two hanging sections and shoe shelving. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 2400mm wide, five shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 97kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 3.6 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 97.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eFive shelves in solid walnut at 400mm deep\u003c\/li\u003e\n\u003cli\u003e3.6 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e25 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776646254927,"sku":"HMS-DRS-010-BK","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776646287695,"sku":"HMS-DRS-010-RS","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776646320463,"sku":"HMS-DRS-010-WH","price":2899.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776646353231,"sku":"HMS-DRS-010-BR","price":3099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Corner_2400mm_Wide_in_Solid_Walnut.jpg?v=1789050865"},{"product_id":"open-wardrobe-and-dressing-room-system-full-dressing-room-3000mm-wide-in-solid-oak","title":"Open Wardrobe and Dressing Room System Full Dressing Room 3000mm Wide in Solid Oak","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a small room turned over to clothes entirely. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3000mm wide, six shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 122kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 4.5 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 141.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in solid oak at 400mm deep\u003c\/li\u003e\n\u003cli\u003e4.5 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776646549839,"sku":"HMS-DRS-011-BK","price":3074.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776646582607,"sku":"HMS-DRS-011-RS","price":3074.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776646615375,"sku":"HMS-DRS-011-WH","price":3074.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776646648143,"sku":"HMS-DRS-011-BR","price":3299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Full_Dressing_Room_3000mm_Wide_in_Solid_Oak.jpg?v=1789050865"},{"product_id":"open-wardrobe-and-dressing-room-system-full-dressing-room-3000mm-wide-in-solid-ash","title":"Open Wardrobe and Dressing Room System Full Dressing Room 3000mm Wide in Solid Ash","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a small room turned over to clothes entirely. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3000mm wide, six shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 113kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 4.5 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 130.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in solid ash at 400mm deep\u003c\/li\u003e\n\u003cli\u003e4.5 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776646811983,"sku":"HMS-DRS-012-BK","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776646844751,"sku":"HMS-DRS-012-RS","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776646877519,"sku":"HMS-DRS-012-WH","price":2724.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776646910287,"sku":"HMS-DRS-012-BR","price":2899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Full_Dressing_Room_3000mm_Wide_in_Solid_Ash.jpg?v=1789050863"},{"product_id":"open-wardrobe-and-dressing-room-system-full-dressing-room-3000mm-wide-in-painted-mdf","title":"Open Wardrobe and Dressing Room System Full Dressing Room 3000mm Wide in Painted MDF","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a small room turned over to clothes entirely. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3000mm wide, six shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 94kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 4.5 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 163.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in painted mdf at 400mm deep\u003c\/li\u003e\n\u003cli\u003e4.5 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776647041359,"sku":"HMS-DRS-013-BK","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776647074127,"sku":"HMS-DRS-013-RS","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776647106895,"sku":"HMS-DRS-013-WH","price":2149.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776647139663,"sku":"HMS-DRS-013-BR","price":2299.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Full_Dressing_Room_3000mm_Wide_in_Painted_MDF.jpg?v=1789050865"},{"product_id":"open-wardrobe-and-dressing-room-system-full-dressing-room-3000mm-wide-in-birch-plywood","title":"Open Wardrobe and Dressing Room System Full Dressing Room 3000mm Wide in Birch Plywood","description":"\u003cp\u003eOpen storage for clothes on the same track system as the rest of the range, sized for a small room turned over to clothes entirely. Hanging rails, shelves and shoe racks all hook into the same uprights.\u003c\/p\u003e\u003cp\u003eThe track system is the reason this shelving scales. Slotted uprights fix to the wall on a 600mm grid, brackets hook into the slots at 32mm pitch, and shelves sit on the brackets. Nothing is fixed at a height you have to live with. A shelf moves in about twenty seconds with no tools, no new holes and no filler, which matters more than any other feature once you have owned it for a year and the books have changed. The uprights carry the load straight down into the wall rather than trying to lever off it, which is why a track system holds far more than the same shelf on a pair of cantilever brackets.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 3000mm wide, six shelves at 400mm deep, hanging rails at 1000mm and 1800mm\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: hardware in your chosen finish, timber oiled and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: hanging rail rated to 40kg per metre, shelves 103kg per shelf evenly distributed, tested to twice that before deflection reaches 3mm\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: uprights at 600mm centres, rails supported at every upright\u003c\/li\u003e\n\u003cli\u003eAdjustability: rails, shelves and shoe racks all move on the 32mm pitch, so a long hanging section becomes a double hanging section in ten minutes\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eDepth: 400mm, which is what a coat hanger actually needs\u003c\/li\u003e\n\u003cli\u003eHanging rail: 25mm stainless tube, 4.5 metres in total\u003c\/li\u003e\n\u003cli\u003eShoe racks: two angled racks included, 900mm each\u003c\/li\u003e\n\u003cli\u003eTrouser rail and tie rail available as accessories\u003c\/li\u003e\n\u003cli\u003ePacked weight: approximately 127.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix slotted uprights, 1800mm\u003c\/li\u003e\n\u003cli\u003eSix shelves in birch plywood at 400mm deep\u003c\/li\u003e\n\u003cli\u003e4.5 metres of 25mm stainless hanging rail with end sockets\u003c\/li\u003e\n\u003cli\u003eTwo angled shoe racks, 900mm each\u003c\/li\u003e\n\u003cli\u003e36 shelf brackets, 400mm\u003c\/li\u003e\n\u003cli\u003eFixing packs for masonry and for timber stud\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eA room system is planned as one thing rather than as several walls that happen to have shelves on them. Keep the shelf lines continuous around a corner if you possibly can, even if the shelf lengths change, because the eye follows the horizontal and a break in it is the thing that makes a room look unplanned. Where a window or a door interrupts a run, stop the shelf at the reveal rather than trying to work around it.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776647237967,"sku":"HMS-DRS-014-BK","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776647270735,"sku":"HMS-DRS-014-RS","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776647303503,"sku":"HMS-DRS-014-WH","price":2299.0,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776647336271,"sku":"HMS-DRS-014-BR","price":2449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Open_Wardrobe_and_Dressing_Room_System_Full_Dressing_Room_3000mm_Wide_in_Birch_Plywood.jpg?v=1789050863"},{"product_id":"floating-shelf-in-solid-oak-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678236495,"sku":"HMS-FLS-001-BK","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678269263,"sku":"HMS-FLS-001-RS","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678302031,"sku":"HMS-FLS-001-WH","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_600mm_Wide_by_200mm_Deep.jpg?v=1789050356"},{"product_id":"floating-shelf-in-solid-walnut-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678367567,"sku":"HMS-FLS-002-BK","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678400335,"sku":"HMS-FLS-002-RS","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678433103,"sku":"HMS-FLS-002-WH","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_600mm_Wide_by_200mm_Deep.jpg?v=1789050332"},{"product_id":"floating-shelf-in-solid-ash-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678465871,"sku":"HMS-FLS-003-BK","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678498639,"sku":"HMS-FLS-003-RS","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678531407,"sku":"HMS-FLS-003-WH","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_600mm_Wide_by_200mm_Deep.jpg?v=1789050315"},{"product_id":"floating-shelf-in-birch-plywood-600mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678596943,"sku":"HMS-FLS-004-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678629711,"sku":"HMS-FLS-004-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678662479,"sku":"HMS-FLS-004-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_600mm_Wide_by_200mm_Deep.jpg?v=1789050298"},{"product_id":"floating-shelf-in-painted-mdf-600mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 16kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678695247,"sku":"HMS-FLS-005-BK","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678728015,"sku":"HMS-FLS-005-RS","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678760783,"sku":"HMS-FLS-005-WH","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_600mm_Wide_by_200mm_Deep.jpg?v=1789050352"},{"product_id":"floating-shelf-in-powder-coated-steel-600mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 26kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678826319,"sku":"HMS-FLS-006-BK","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678859087,"sku":"HMS-FLS-006-RS","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678891855,"sku":"HMS-FLS-006-WH","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_600mm_Wide_by_200mm_Deep.jpg?v=1789050338"},{"product_id":"floating-shelf-in-solid-iroko-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678924623,"sku":"HMS-FLS-007-BK","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678957391,"sku":"HMS-FLS-007-RS","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678990159,"sku":"HMS-FLS-007-WH","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_600mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-oak-900mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 32kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679121231,"sku":"HMS-FLS-008-BK","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679153999,"sku":"HMS-FLS-008-RS","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679186767,"sku":"HMS-FLS-008-WH","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_900mm_Wide_by_200mm_Deep.jpg?v=1789050332"},{"product_id":"floating-shelf-in-solid-walnut-900mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 32kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679252303,"sku":"HMS-FLS-009-BK","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679285071,"sku":"HMS-FLS-009-RS","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679317839,"sku":"HMS-FLS-009-WH","price":269.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_900mm_Wide_by_200mm_Deep.jpg?v=1789050351"},{"product_id":"floating-shelf-in-solid-ash-900mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 30kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679350607,"sku":"HMS-FLS-010-BK","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679383375,"sku":"HMS-FLS-010-RS","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679416143,"sku":"HMS-FLS-010-WH","price":159.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_900mm_Wide_by_200mm_Deep.jpg?v=1789050324"},{"product_id":"floating-shelf-in-birch-plywood-900mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 9.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679481679,"sku":"HMS-FLS-011-BK","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679514447,"sku":"HMS-FLS-011-RS","price":129.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679547215,"sku":"HMS-FLS-011-WH","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_900mm_Wide_by_200mm_Deep.jpg?v=1789050346"},{"product_id":"floating-shelf-in-painted-mdf-900mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679678287,"sku":"HMS-FLS-012-BK","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679711055,"sku":"HMS-FLS-012-RS","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679743823,"sku":"HMS-FLS-012-WH","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_900mm_Wide_by_200mm_Deep.jpg?v=1789050322"},{"product_id":"floating-shelf-in-powder-coated-steel-900mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 39kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679776591,"sku":"HMS-FLS-013-BK","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679809359,"sku":"HMS-FLS-013-RS","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679842127,"sku":"HMS-FLS-013-WH","price":144.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_900mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-900mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 900mm Wide by 200mm Deep","description":"\u003cp\u003eA single 900mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for the commonest length, and the one most walls want.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 900mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 900mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776679907663,"sku":"HMS-FLS-014-BK","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776679940431,"sku":"HMS-FLS-014-RS","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776679973199,"sku":"HMS-FLS-014-WH","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_900mm_Wide_by_200mm_Deep.jpg?v=1789050307"},{"product_id":"floating-shelf-in-solid-oak-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680038735,"sku":"HMS-FLS-015-BK","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680071503,"sku":"HMS-FLS-015-RS","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680104271,"sku":"HMS-FLS-015-WH","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_1200mm_Wide_by_200mm_Deep.jpg?v=1789050323"},{"product_id":"floating-shelf-in-solid-walnut-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680137039,"sku":"HMS-FLS-016-BK","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680169807,"sku":"HMS-FLS-016-RS","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680202575,"sku":"HMS-FLS-016-WH","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_1200mm_Wide_by_200mm_Deep.jpg?v=1789050324"},{"product_id":"floating-shelf-in-solid-ash-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680268111,"sku":"HMS-FLS-017-BK","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680300879,"sku":"HMS-FLS-017-RS","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680333647,"sku":"HMS-FLS-017-WH","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_1200mm_Wide_by_200mm_Deep.jpg?v=1789050315"},{"product_id":"floating-shelf-in-birch-plywood-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680399183,"sku":"HMS-FLS-018-BK","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680431951,"sku":"HMS-FLS-018-RS","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680464719,"sku":"HMS-FLS-018-WH","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_1200mm_Wide_by_200mm_Deep.jpg?v=1789050346"},{"product_id":"floating-shelf-in-painted-mdf-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680497487,"sku":"HMS-FLS-019-BK","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680530255,"sku":"HMS-FLS-019-RS","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680563023,"sku":"HMS-FLS-019-WH","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_1200mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-powder-coated-steel-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 52kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680628559,"sku":"HMS-FLS-020-BK","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680661327,"sku":"HMS-FLS-020-RS","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680694095,"sku":"HMS-FLS-020-WH","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_1200mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680759631,"sku":"HMS-FLS-021-BK","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680792399,"sku":"HMS-FLS-021-RS","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680825167,"sku":"HMS-FLS-021-WH","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1200mm_Wide_by_200mm_Deep.jpg?v=1789050341"},{"product_id":"floating-shelf-in-solid-oak-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 54kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 16.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680857935,"sku":"HMS-FLS-022-BK","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680890703,"sku":"HMS-FLS-022-RS","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680923471,"sku":"HMS-FLS-022-WH","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_1500mm_Wide_by_200mm_Deep.jpg?v=1789050340"},{"product_id":"floating-shelf-in-solid-walnut-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 54kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680989007,"sku":"HMS-FLS-023-BK","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681021775,"sku":"HMS-FLS-023-RS","price":419.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681054543,"sku":"HMS-FLS-023-WH","price":419.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_1500mm_Wide_by_200mm_Deep.jpg?v=1789050332"},{"product_id":"floating-shelf-in-solid-ash-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681120079,"sku":"HMS-FLS-024-BK","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681152847,"sku":"HMS-FLS-024-RS","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681185615,"sku":"HMS-FLS-024-WH","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_1500mm_Wide_by_200mm_Deep.jpg?v=1789050330"},{"product_id":"floating-shelf-in-birch-plywood-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681316687,"sku":"HMS-FLS-025-BK","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681349455,"sku":"HMS-FLS-025-RS","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681382223,"sku":"HMS-FLS-025-WH","price":194.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_1500mm_Wide_by_200mm_Deep.jpg?v=1789050346"},{"product_id":"floating-shelf-in-painted-mdf-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 42kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681546063,"sku":"HMS-FLS-026-BK","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681578831,"sku":"HMS-FLS-026-RS","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681611599,"sku":"HMS-FLS-026-WH","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_1500mm_Wide_by_200mm_Deep.jpg?v=1789050323"},{"product_id":"floating-shelf-in-powder-coated-steel-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 66kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681677135,"sku":"HMS-FLS-027-BK","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681709903,"sku":"HMS-FLS-027-RS","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681742671,"sku":"HMS-FLS-027-WH","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_1500mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-1500mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1500mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1500mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a long run where you want one shelf rather than two.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1500mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 55kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1500mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776681808207,"sku":"HMS-FLS-028-BK","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776681840975,"sku":"HMS-FLS-028-RS","price":319.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776681873743,"sku":"HMS-FLS-028-WH","price":319.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1500mm_Wide_by_200mm_Deep.jpg?v=1789050340"},{"product_id":"floating-shelf-in-solid-oak-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 64kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 19.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682037583,"sku":"HMS-FLS-029-BK","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682070351,"sku":"HMS-FLS-029-RS","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682103119,"sku":"HMS-FLS-029-WH","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_1800mm_Wide_by_200mm_Deep.jpg?v=1789050332"},{"product_id":"floating-shelf-in-solid-walnut-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 64kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 18.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682234191,"sku":"HMS-FLS-030-BK","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682266959,"sku":"HMS-FLS-030-RS","price":499.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682299727,"sku":"HMS-FLS-030-WH","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_1800mm_Wide_by_200mm_Deep.jpg?v=1789050333"},{"product_id":"floating-shelf-in-solid-ash-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 60kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682365263,"sku":"HMS-FLS-031-BK","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682398031,"sku":"HMS-FLS-031-RS","price":289.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682430799,"sku":"HMS-FLS-031-WH","price":289.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_1800mm_Wide_by_200mm_Deep.jpg?v=1789050315"},{"product_id":"floating-shelf-in-birch-plywood-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 54kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 17.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682529103,"sku":"HMS-FLS-032-BK","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682561871,"sku":"HMS-FLS-032-RS","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682594639,"sku":"HMS-FLS-032-WH","price":229.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_1800mm_Wide_by_200mm_Deep.jpg?v=1789050338"},{"product_id":"floating-shelf-in-painted-mdf-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 50kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682660175,"sku":"HMS-FLS-033-BK","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682692943,"sku":"HMS-FLS-033-RS","price":209.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682725711,"sku":"HMS-FLS-033-WH","price":209.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_1800mm_Wide_by_200mm_Deep.jpg?v=1789050305"},{"product_id":"floating-shelf-in-powder-coated-steel-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 79kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682791247,"sku":"HMS-FLS-034-BK","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682824015,"sku":"HMS-FLS-034-RS","price":249.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776682856783,"sku":"HMS-FLS-034-WH","price":249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_1800mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-1800mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1800mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1800mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a full wall in one board, which needs a solid fixing.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1800mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 66kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 4 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 20.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1800mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e4 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776682955087,"sku":"HMS-FLS-035-BK","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776682987855,"sku":"HMS-FLS-035-RS","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683020623,"sku":"HMS-FLS-035-WH","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1800mm_Wide_by_200mm_Deep.jpg?v=1789050331"}],"url":"https:\/\/homartshelfs.com\/collections\/bedroom.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}