{"title":"600mm Wide","description":"\u003cp\u003eShort runs for a narrow wall, a chimney return or a single stack of books. Usually a one-person, one-hour fit.\u003c\/p\u003e","products":[{"product_id":"picture-ledge-set-of-eight-in-solid-oak-600mm-wide","title":"Picture Ledge Set of Eight in Solid Oak 600mm Wide","description":"\u003cp\u003eEight ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 19.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid oak, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e16 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664146255,"sku":"HMS-PLS-021-BK","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664179023,"sku":"HMS-PLS-021-RS","price":529.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664211791,"sku":"HMS-PLS-021-WH","price":529.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Oak_600mm_Wide.jpg?v=1789051001"},{"product_id":"picture-ledge-set-of-eight-in-solid-ash-600mm-wide","title":"Picture Ledge Set of Eight in Solid Ash 600mm Wide","description":"\u003cp\u003eEight ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 12kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 18.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid ash, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e16 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664342863,"sku":"HMS-PLS-022-BK","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664375631,"sku":"HMS-PLS-022-RS","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664408399,"sku":"HMS-PLS-022-WH","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Ash_600mm_Wide.jpg?v=1789050978"},{"product_id":"picture-ledge-set-of-eight-in-painted-mdf-600mm-wide","title":"Picture Ledge Set of Eight in Painted MDF 600mm Wide","description":"\u003cp\u003eEight ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 10kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 22.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in painted mdf, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e16 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664539471,"sku":"HMS-PLS-023-BK","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664572239,"sku":"HMS-PLS-023-RS","price":359.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664605007,"sku":"HMS-PLS-023-WH","price":359.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"picture-ledge-set-of-eight-in-solid-walnut-600mm-wide","title":"Picture Ledge Set of Eight in Solid Walnut 600mm Wide","description":"\u003cp\u003eEight ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 19.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid walnut, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e16 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664703311,"sku":"HMS-PLS-024-BK","price":709.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664736079,"sku":"HMS-PLS-024-RS","price":709.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664768847,"sku":"HMS-PLS-024-WH","price":709.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Walnut_600mm_Wide.jpg?v=1789050988"},{"product_id":"picture-ledge-set-of-eight-in-birch-plywood-600mm-wide","title":"Picture Ledge Set of Eight in Birch Plywood 600mm Wide","description":"\u003cp\u003eEight ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 11kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 17.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in birch plywood, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e16 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664899919,"sku":"HMS-PLS-025-BK","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664932687,"sku":"HMS-PLS-025-RS","price":389.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664965455,"sku":"HMS-PLS-025-WH","price":389.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Birch_Plywood_600mm_Wide.jpg?v=1789050988"},{"product_id":"picture-ledge-set-of-twelve-in-solid-oak-600mm-wide","title":"Picture Ledge Set of Twelve in Solid Oak 600mm Wide","description":"\u003cp\u003eTwelve ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains twelve ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 29.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve picture ledges in solid oak, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776666833231,"sku":"HMS-PLS-036-BK","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776666865999,"sku":"HMS-PLS-036-RS","price":789.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776666898767,"sku":"HMS-PLS-036-WH","price":789.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Twelve_in_Solid_Oak_600mm_Wide.jpg?v=1789050991"},{"product_id":"picture-ledge-set-of-twelve-in-solid-ash-600mm-wide","title":"Picture Ledge Set of Twelve in Solid Ash 600mm Wide","description":"\u003cp\u003eTwelve ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 12kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains twelve ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 27.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve picture ledges in solid ash, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776666997071,"sku":"HMS-PLS-037-BK","price":689.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667029839,"sku":"HMS-PLS-037-RS","price":689.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667062607,"sku":"HMS-PLS-037-WH","price":689.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"picture-ledge-set-of-twelve-in-painted-mdf-600mm-wide","title":"Picture Ledge Set of Twelve in Painted MDF 600mm Wide","description":"\u003cp\u003eTwelve ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 10kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains twelve ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 34.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve picture ledges in painted mdf, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776667193679,"sku":"HMS-PLS-038-BK","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667226447,"sku":"HMS-PLS-038-RS","price":549.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667259215,"sku":"HMS-PLS-038-WH","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Twelve_in_Painted_MDF_600mm_Wide.jpg?v=1789050982"},{"product_id":"picture-ledge-set-of-twelve-in-solid-walnut-600mm-wide","title":"Picture Ledge Set of Twelve in Solid Walnut 600mm Wide","description":"\u003cp\u003eTwelve ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains twelve ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 28.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve picture ledges in solid walnut, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776667357519,"sku":"HMS-PLS-039-BK","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667390287,"sku":"HMS-PLS-039-RS","price":1074.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667423055,"sku":"HMS-PLS-039-WH","price":1074.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Twelve_in_Solid_Walnut_600mm_Wide.jpg?v=1789050997"},{"product_id":"picture-ledge-set-of-twelve-in-birch-plywood-600mm-wide","title":"Picture Ledge Set of Twelve in Birch Plywood 600mm Wide","description":"\u003cp\u003eTwelve ledges at 600mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Twelve ledges, 600mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 11kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains twelve ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 26.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwelve picture ledges in birch plywood, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776667521359,"sku":"HMS-PLS-040-BK","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667554127,"sku":"HMS-PLS-040-RS","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667586895,"sku":"HMS-PLS-040-WH","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Twelve_in_Birch_Plywood_600mm_Wide.jpg?v=1789050973"},{"product_id":"floating-shelf-in-solid-oak-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678236495,"sku":"HMS-FLS-001-BK","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678269263,"sku":"HMS-FLS-001-RS","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678302031,"sku":"HMS-FLS-001-WH","price":134.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_600mm_Wide_by_200mm_Deep.jpg?v=1789050356"},{"product_id":"floating-shelf-in-solid-walnut-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678367567,"sku":"HMS-FLS-002-BK","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678400335,"sku":"HMS-FLS-002-RS","price":189.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678433103,"sku":"HMS-FLS-002-WH","price":189.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_600mm_Wide_by_200mm_Deep.jpg?v=1789050332"},{"product_id":"floating-shelf-in-solid-ash-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678465871,"sku":"HMS-FLS-003-BK","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678498639,"sku":"HMS-FLS-003-RS","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678531407,"sku":"HMS-FLS-003-WH","price":119.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_600mm_Wide_by_200mm_Deep.jpg?v=1789050315"},{"product_id":"floating-shelf-in-birch-plywood-600mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678596943,"sku":"HMS-FLS-004-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678629711,"sku":"HMS-FLS-004-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678662479,"sku":"HMS-FLS-004-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_600mm_Wide_by_200mm_Deep.jpg?v=1789050298"},{"product_id":"floating-shelf-in-painted-mdf-600mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 16kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678695247,"sku":"HMS-FLS-005-BK","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678728015,"sku":"HMS-FLS-005-RS","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678760783,"sku":"HMS-FLS-005-WH","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_600mm_Wide_by_200mm_Deep.jpg?v=1789050352"},{"product_id":"floating-shelf-in-powder-coated-steel-600mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 26kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678826319,"sku":"HMS-FLS-006-BK","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678859087,"sku":"HMS-FLS-006-RS","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678891855,"sku":"HMS-FLS-006-WH","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_600mm_Wide_by_200mm_Deep.jpg?v=1789050338"},{"product_id":"floating-shelf-in-solid-iroko-600mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 600mm Wide by 200mm Deep","description":"\u003cp\u003eA single 600mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for an alcove, a bathroom or beside a bed.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 2 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 600mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776678924623,"sku":"HMS-FLS-007-BK","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776678957391,"sku":"HMS-FLS-007-RS","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776678990159,"sku":"HMS-FLS-007-WH","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_600mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"picture-ledge-in-solid-oak-600mm-wide","title":"Picture Ledge in Solid Oak 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid oak, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid oak, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683086159,"sku":"HMS-PLG-001-BK","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683118927,"sku":"HMS-PLG-001-RS","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683151695,"sku":"HMS-PLG-001-WH","price":74.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Oak_600mm_Wide.jpg?v=1789050977"},{"product_id":"picture-ledge-in-solid-ash-600mm-wide","title":"Picture Ledge in Solid Ash 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid ash, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 12kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid ash, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683184463,"sku":"HMS-PLG-002-BK","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683217231,"sku":"HMS-PLG-002-RS","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683249999,"sku":"HMS-PLG-002-WH","price":64.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Ash_600mm_Wide.jpg?v=1789050993"},{"product_id":"picture-ledge-in-solid-walnut-600mm-wide","title":"Picture Ledge in Solid Walnut 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in solid walnut, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 13kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid walnut, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683315535,"sku":"HMS-PLG-003-BK","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683348303,"sku":"HMS-PLG-003-RS","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683381071,"sku":"HMS-PLG-003-WH","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Walnut_600mm_Wide.jpg?v=1789050955"},{"product_id":"picture-ledge-in-painted-mdf-600mm-wide","title":"Picture Ledge in Painted MDF 600mm Wide","description":"\u003cp\u003eA single 600mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for a small print or a row of postcards.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 10kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 2 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 2.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 600mm by 90mm\u003c\/li\u003e\n\u003cli\u003e2 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776683479375,"sku":"HMS-PLG-004-BK","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776683512143,"sku":"HMS-PLG-004-RS","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776683544911,"sku":"HMS-PLG-004-WH","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_600mm_Wide.jpg?v=1789050865"},{"product_id":"shelf-bracket-braced-desk-600mm","title":"Shelf Bracket Braced Desk 600mm","description":"\u003cp\u003eA single 600mm braced desk bracket, for a desk shelf, braced with a diagonal stay. Hooks into any 32mm pitch upright, ours or anybody else's.\u003c\/p\u003e\u003cp\u003eBrackets are where cheap shelving gives itself away. A 2mm pressed bracket will hold a shelf and will also flex enough that the shelf front dips under a row of hardbacks. Ours are 3mm for the standard range and 4mm with a welded gusset for the heavy duty range, and the hooks are formed rather than welded on, which is what stops them opening up over time. Every bracket takes a shelf clip, supplied, so the board cannot slide forward off the front.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm deep, 330mm tall at the wall\u003c\/li\u003e\n\u003cli\u003eMaterial: 4mm pressed steel with a diagonal stay\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: 80kg per pair at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one bracket per upright per shelf, uprights at 600mm centres or closer\u003c\/li\u003e\n\u003cli\u003eAdjustability: hooks in and out on the 32mm pitch with no tools\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable, the bracket hooks into an upright\u003c\/li\u003e\n\u003cli\u003eBoard thickness accepted: 18mm to 40mm\u003c\/li\u003e\n\u003cli\u003eShelf clip: supplied, stops the board sliding forward\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch upright\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 0.54 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly, and in packs of four and ten at the checkout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne braced desk bracket, 600mm\u003c\/li\u003e\n\u003cli\u003eOne shelf clip\u003c\/li\u003e\n\u003cli\u003eOne grub screw and hex key where the bracket takes one\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Single","offer_id":58776688099663,"sku":"HMS-BRK-010-1","price":37.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Four","offer_id":58776688132431,"sku":"HMS-BRK-010-4","price":144.95,"currency_code":"GBP","in_stock":true},{"title":"Pack of Ten","offer_id":58776688165199,"sku":"HMS-BRK-010-10","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of Twenty","offer_id":58776688197967,"sku":"HMS-BRK-010-20","price":649.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Bracket_Braced_Desk_600mm.jpg?v=1789050968"},{"product_id":"shelf-board-in-solid-oak-600mm-wide-by-250mm-deep","title":"Shelf Board in Solid Oak 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in solid oak, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 24kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid oak, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776688591183,"sku":"HMS-BRD-001-250","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776688623951,"sku":"HMS-BRD-001-200","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776688656719,"sku":"HMS-BRD-001-300","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776688689487,"sku":"HMS-BRD-001-400","price":129.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Oak_600mm_Wide_by_250mm_Deep.jpg?v=1789050936"},{"product_id":"shelf-board-in-solid-walnut-600mm-wide-by-250mm-deep","title":"Shelf Board in Solid Walnut 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in solid walnut, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 24kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid walnut, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776688755023,"sku":"HMS-BRD-002-250","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776688787791,"sku":"HMS-BRD-002-200","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776688820559,"sku":"HMS-BRD-002-300","price":139.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776688853327,"sku":"HMS-BRD-002-400","price":184.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Walnut_600mm_Wide_by_250mm_Deep.jpg?v=1789050945"},{"product_id":"shelf-board-in-solid-ash-600mm-wide-by-250mm-deep","title":"Shelf Board in Solid Ash 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in solid ash, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid ash, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776688918863,"sku":"HMS-BRD-003-250","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776688951631,"sku":"HMS-BRD-003-200","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776688984399,"sku":"HMS-BRD-003-300","price":84.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689017167,"sku":"HMS-BRD-003-400","price":109.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Ash_600mm_Wide_by_250mm_Deep.jpg?v=1789050975"},{"product_id":"shelf-board-in-birch-plywood-600mm-wide-by-250mm-deep","title":"Shelf Board in Birch Plywood 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in birch plywood, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 20kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in birch plywood, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689115471,"sku":"HMS-BRD-004-250","price":59.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689148239,"sku":"HMS-BRD-004-200","price":49.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689181007,"sku":"HMS-BRD-004-300","price":69.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689213775,"sku":"HMS-BRD-004-400","price":89.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Birch_Plywood_600mm_Wide_by_250mm_Deep.jpg?v=1789050920"},{"product_id":"shelf-board-in-painted-mdf-600mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 18kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689279311,"sku":"HMS-BRD-005-250","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689312079,"sku":"HMS-BRD-005-200","price":47.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689344847,"sku":"HMS-BRD-005-300","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689377615,"sku":"HMS-BRD-005-400","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Painted_MDF_600mm_Wide_by_250mm_Deep.jpg?v=1789050927"},{"product_id":"shelf-board-in-powder-coated-steel-600mm-wide-by-250mm-deep","title":"Shelf Board in Powder Coated Steel 600mm Wide by 250mm Deep","description":"\u003cp\u003eA single 600mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for an alcove or a short bay.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 600mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 29kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 3.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in powder coated steel, 600mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776689475919,"sku":"HMS-BRD-006-250","price":64.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776689508687,"sku":"HMS-BRD-006-200","price":54.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776689541455,"sku":"HMS-BRD-006-300","price":74.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776689574223,"sku":"HMS-BRD-006-400","price":99.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Powder_Coated_Steel_600mm_Wide_by_250mm_Deep.jpg?v=1789050928"}],"url":"https:\/\/homartshelfs.com\/collections\/600mm-wide.oembed","provider":"Homart Shelfs","version":"1.0","type":"link"}