{"title":"1200mm Wide","description":"\u003cp\u003eA metre and a bit of shelf. Plan on a support every 400 to 600mm if it is carrying books rather than ornaments.\u003c\/p\u003e","products":[{"product_id":"floating-shelf-set-of-four-in-solid-oak-1200mm-wide","title":"Floating Shelf Set of Four in Solid Oak 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 53.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid oak, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651235663,"sku":"HMS-FSS-006-BK","price":879.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776651268431,"sku":"HMS-FSS-006-RS","price":879.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776651301199,"sku":"HMS-FSS-006-WH","price":879.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Oak_1200mm_Wide.jpg?v=1789050354"},{"product_id":"floating-shelf-set-of-four-in-solid-walnut-1200mm-wide","title":"Floating Shelf Set of Four in Solid Walnut 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 51.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid walnut, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651432271,"sku":"HMS-FSS-007-BK","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776651465039,"sku":"HMS-FSS-007-RS","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776651497807,"sku":"HMS-FSS-007-WH","price":1274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Walnut_1200mm_Wide.jpg?v=1789050364"},{"product_id":"floating-shelf-set-of-four-in-solid-ash-1200mm-wide","title":"Floating Shelf Set of Four in Solid Ash 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 48.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid ash, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651628879,"sku":"HMS-FSS-008-BK","price":749.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776651661647,"sku":"HMS-FSS-008-RS","price":749.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776651694415,"sku":"HMS-FSS-008-WH","price":749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Ash_1200mm_Wide.jpg?v=1789050348"},{"product_id":"floating-shelf-set-of-four-in-birch-plywood-1200mm-wide","title":"Floating Shelf Set of Four in Birch Plywood 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 47.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in birch plywood, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651792719,"sku":"HMS-FSS-009-BK","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776651825487,"sku":"HMS-FSS-009-RS","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776651858255,"sku":"HMS-FSS-009-WH","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Birch_Plywood_1200mm_Wide.jpg?v=1789050365"},{"product_id":"floating-shelf-set-of-four-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Four in Solid Iroko 1200mm Wide","description":"\u003cp\u003eFour floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains four shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 56.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eFour welded steel frames\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776651989327,"sku":"HMS-FSS-010-BK","price":969.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776652022095,"sku":"HMS-FSS-010-RS","price":969.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776652054863,"sku":"HMS-FSS-010-WH","price":969.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Four_in_Solid_Iroko_1200mm_Wide.jpg?v=1789050364"},{"product_id":"floating-shelf-set-of-six-in-solid-oak-1200mm-wide","title":"Floating Shelf Set of Six in Solid Oak 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 79.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid oak, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653037903,"sku":"HMS-FSS-016-BK","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653070671,"sku":"HMS-FSS-016-RS","price":1324.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653103439,"sku":"HMS-FSS-016-WH","price":1324.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Oak_1200mm_Wide.jpg?v=1789050365"},{"product_id":"floating-shelf-set-of-six-in-solid-walnut-1200mm-wide","title":"Floating Shelf Set of Six in Solid Walnut 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 77.5 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid walnut, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653201743,"sku":"HMS-FSS-017-BK","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653234511,"sku":"HMS-FSS-017-RS","price":1899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653267279,"sku":"HMS-FSS-017-WH","price":1899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Walnut_1200mm_Wide.jpg?v=1789050801"},{"product_id":"floating-shelf-set-of-six-in-solid-ash-1200mm-wide","title":"Floating Shelf Set of Six in Solid Ash 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 72.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid ash, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653463887,"sku":"HMS-FSS-018-BK","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653496655,"sku":"HMS-FSS-018-RS","price":1124.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653529423,"sku":"HMS-FSS-018-WH","price":1124.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Ash_1200mm_Wide.jpg?v=1789050365"},{"product_id":"floating-shelf-set-of-six-in-birch-plywood-1200mm-wide","title":"Floating Shelf Set of Six in Birch Plywood 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 70.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in birch plywood, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653660495,"sku":"HMS-FSS-019-BK","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653693263,"sku":"HMS-FSS-019-RS","price":899.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653726031,"sku":"HMS-FSS-019-WH","price":899.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Birch_Plywood_1200mm_Wide.jpg?v=1789050364"},{"product_id":"floating-shelf-set-of-six-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Six in Solid Iroko 1200mm Wide","description":"\u003cp\u003eSix floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains six shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 84.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eSix welded steel frames\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776653824335,"sku":"HMS-FSS-020-BK","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776653857103,"sku":"HMS-FSS-020-RS","price":1449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776653889871,"sku":"HMS-FSS-020-WH","price":1449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Six_in_Solid_Iroko_1200mm_Wide.jpg?v=1789050357"},{"product_id":"floating-shelf-set-of-eight-in-solid-oak-1200mm-wide","title":"Floating Shelf Set of Eight in Solid Oak 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 106.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid oak, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776656249167,"sku":"HMS-FSS-031-BK","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776656281935,"sku":"HMS-FSS-031-RS","price":1749.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776656314703,"sku":"HMS-FSS-031-WH","price":1749.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"floating-shelf-set-of-eight-in-solid-walnut-1200mm-wide","title":"Floating Shelf Set of Eight in Solid Walnut 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 103.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid walnut, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776656413007,"sku":"HMS-FSS-032-BK","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776656445775,"sku":"HMS-FSS-032-RS","price":2524.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776656478543,"sku":"HMS-FSS-032-WH","price":2524.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"floating-shelf-set-of-eight-in-solid-ash-1200mm-wide","title":"Floating Shelf Set of Eight in Solid Ash 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 97.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid ash, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776656609615,"sku":"HMS-FSS-033-BK","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776656642383,"sku":"HMS-FSS-033-RS","price":1499.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776656675151,"sku":"HMS-FSS-033-WH","price":1499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Eight_in_Solid_Ash_1200mm_Wide.jpg?v=1789050361"},{"product_id":"floating-shelf-set-of-eight-in-birch-plywood-1200mm-wide","title":"Floating Shelf Set of Eight in Birch Plywood 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 94.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in birch plywood, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776656773455,"sku":"HMS-FSS-034-BK","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776656806223,"sku":"HMS-FSS-034-RS","price":1199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776656838991,"sku":"HMS-FSS-034-WH","price":1199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_Set_of_Eight_in_Birch_Plywood_1200mm_Wide.jpg?v=1789050341"},{"product_id":"floating-shelf-set-of-eight-in-solid-iroko-1200mm-wide","title":"Floating Shelf Set of Eight in Solid Iroko 1200mm Wide","description":"\u003cp\u003eEight floating shelves at 1200mm, supplied as a set so the grain and the colour are matched across the wall. Boards from the same tree wherever we can, which is most of the time.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight shelves, 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, hardware concealed\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg per shelf evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame per shelf, 3 wall fixings per frame\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the heights out on paper before you drill\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what lets a floating shelf carry weight\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, concealed inside the board\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm on request\u003c\/li\u003e\n\u003cli\u003eSet contains eight shelves\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 112.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight shelves in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eEight welded steel frames\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eGrub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA paper marking template for each shelf\u003c\/li\u003e\n\u003cli\u003eA small bottle of the same oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776657035599,"sku":"HMS-FSS-035-BK","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776657068367,"sku":"HMS-FSS-035-RS","price":1949.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776657101135,"sku":"HMS-FSS-035-WH","price":1949.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"picture-ledge-set-of-four-in-solid-oak-1200mm-wide","title":"Picture Ledge Set of Four in Solid Oak 1200mm Wide","description":"\u003cp\u003eFour ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains four ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 18.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour picture ledges in solid oak, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776662049103,"sku":"HMS-PLS-011-BK","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776662081871,"sku":"HMS-PLS-011-RS","price":449.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776662114639,"sku":"HMS-PLS-011-WH","price":449.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Four_in_Solid_Oak_1200mm_Wide.jpg?v=1789050949"},{"product_id":"picture-ledge-set-of-four-in-solid-ash-1200mm-wide","title":"Picture Ledge Set of Four in Solid Ash 1200mm Wide","description":"\u003cp\u003eFour ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains four ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 16.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour picture ledges in solid ash, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776662245711,"sku":"HMS-PLS-012-BK","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776662278479,"sku":"HMS-PLS-012-RS","price":379.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776662311247,"sku":"HMS-PLS-012-WH","price":379.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Four_in_Solid_Ash_1200mm_Wide.jpg?v=1789050957"},{"product_id":"picture-ledge-set-of-four-in-painted-mdf-1200mm-wide","title":"Picture Ledge Set of Four in Painted MDF 1200mm Wide","description":"\u003cp\u003eFour ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains four ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 21.1 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour picture ledges in painted mdf, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776662540623,"sku":"HMS-PLS-013-BK","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776662573391,"sku":"HMS-PLS-013-RS","price":279.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776662606159,"sku":"HMS-PLS-013-WH","price":279.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Four_in_Painted_MDF_1200mm_Wide.jpg?v=1789050949"},{"product_id":"picture-ledge-set-of-four-in-solid-walnut-1200mm-wide","title":"Picture Ledge Set of Four in Solid Walnut 1200mm Wide","description":"\u003cp\u003eFour ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains four ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 17.4 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour picture ledges in solid walnut, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776662737231,"sku":"HMS-PLS-014-BK","price":629.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776662769999,"sku":"HMS-PLS-014-RS","price":629.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776662802767,"sku":"HMS-PLS-014-WH","price":629.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Four_in_Solid_Walnut_1200mm_Wide.jpg?v=1789050989"},{"product_id":"picture-ledge-set-of-four-in-birch-plywood-1200mm-wide","title":"Picture Ledge Set of Four in Birch Plywood 1200mm Wide","description":"\u003cp\u003eFour ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Four ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains four ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 15.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFour picture ledges in birch plywood, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e12 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776662966607,"sku":"HMS-PLS-015-BK","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776662999375,"sku":"HMS-PLS-015-RS","price":309.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776663032143,"sku":"HMS-PLS-015-WH","price":309.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"picture-ledge-set-of-six-in-solid-oak-1200mm-wide","title":"Picture Ledge Set of Six in Solid Oak 1200mm Wide","description":"\u003cp\u003eSix ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains six ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 27.0 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix picture ledges in solid oak, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776663163215,"sku":"HMS-PLS-016-BK","price":669.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776663195983,"sku":"HMS-PLS-016-RS","price":669.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776663228751,"sku":"HMS-PLS-016-WH","price":669.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"picture-ledge-set-of-six-in-solid-ash-1200mm-wide","title":"Picture Ledge Set of Six in Solid Ash 1200mm Wide","description":"\u003cp\u003eSix ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains six ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 24.6 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix picture ledges in solid ash, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776663392591,"sku":"HMS-PLS-017-BK","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776663425359,"sku":"HMS-PLS-017-RS","price":579.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776663458127,"sku":"HMS-PLS-017-WH","price":579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Six_in_Solid_Ash_1200mm_Wide.jpg?v=1789050970"},{"product_id":"picture-ledge-set-of-six-in-painted-mdf-1200mm-wide","title":"Picture Ledge Set of Six in Painted MDF 1200mm Wide","description":"\u003cp\u003eSix ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains six ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix picture ledges in painted mdf, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776663556431,"sku":"HMS-PLS-018-BK","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776663589199,"sku":"HMS-PLS-018-RS","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776663621967,"sku":"HMS-PLS-018-WH","price":429.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Six_in_Painted_MDF_1200mm_Wide.jpg?v=1789051001"},{"product_id":"picture-ledge-set-of-six-in-solid-walnut-1200mm-wide","title":"Picture Ledge Set of Six in Solid Walnut 1200mm Wide","description":"\u003cp\u003eSix ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains six ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 26.2 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix picture ledges in solid walnut, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776663818575,"sku":"HMS-PLS-019-BK","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776663851343,"sku":"HMS-PLS-019-RS","price":949.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776663884111,"sku":"HMS-PLS-019-WH","price":949.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Six_in_Solid_Walnut_1200mm_Wide.jpg?v=1789051003"},{"product_id":"picture-ledge-set-of-six-in-birch-plywood-1200mm-wide","title":"Picture Ledge Set of Six in Birch Plywood 1200mm Wide","description":"\u003cp\u003eSix ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Six ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains six ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 23.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix picture ledges in birch plywood, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e18 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776664015183,"sku":"HMS-PLS-020-BK","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776664047951,"sku":"HMS-PLS-020-RS","price":459.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776664080719,"sku":"HMS-PLS-020-WH","price":459.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Six_in_Birch_Plywood_1200mm_Wide.jpg?v=1789050980"},{"product_id":"picture-ledge-set-of-eight-in-solid-oak-1200mm-wide","title":"Picture Ledge Set of Eight in Solid Oak 1200mm Wide","description":"\u003cp\u003eEight ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 35.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid oak, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776667685199,"sku":"HMS-PLS-041-BK","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667717967,"sku":"HMS-PLS-041-RS","price":889.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667750735,"sku":"HMS-PLS-041-WH","price":889.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Oak_1200mm_Wide.jpg?v=1789051002"},{"product_id":"picture-ledge-set-of-eight-in-solid-ash-1200mm-wide","title":"Picture Ledge Set of Eight in Solid Ash 1200mm Wide","description":"\u003cp\u003eEight ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 32.8 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid ash, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776667881807,"sku":"HMS-PLS-042-BK","price":769.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776667914575,"sku":"HMS-PLS-042-RS","price":769.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776667947343,"sku":"HMS-PLS-042-WH","price":769.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Ash_1200mm_Wide.jpg?v=1789050988"},{"product_id":"picture-ledge-set-of-eight-in-painted-mdf-1200mm-wide","title":"Picture Ledge Set of Eight in Painted MDF 1200mm Wide","description":"\u003cp\u003eEight ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 42.3 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in painted mdf, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776668045647,"sku":"HMS-PLS-043-BK","price":569.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776668078415,"sku":"HMS-PLS-043-RS","price":569.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776668111183,"sku":"HMS-PLS-043-WH","price":569.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Painted_MDF_1200mm_Wide.jpg?v=1789050963"},{"product_id":"picture-ledge-set-of-eight-in-solid-walnut-1200mm-wide","title":"Picture Ledge Set of Eight in Solid Walnut 1200mm Wide","description":"\u003cp\u003eEight ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 34.9 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in solid walnut, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776668242255,"sku":"HMS-PLS-044-BK","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776668275023,"sku":"HMS-PLS-044-RS","price":1274.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776668307791,"sku":"HMS-PLS-044-WH","price":1274.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Solid_Walnut_1200mm_Wide.jpg?v=1789050994"},{"product_id":"picture-ledge-set-of-eight-in-birch-plywood-1200mm-wide","title":"Picture Ledge Set of Eight in Birch Plywood 1200mm Wide","description":"\u003cp\u003eEight ledges at 1200mm, which is enough to build a picture wall you can change on a Sunday afternoon without touching the plaster again.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: Eight ledges, 1200mm wide by 90mm deep, 22mm front lip\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 22kg per ledge evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings per ledge, straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but the pictures on it move freely, which is the point\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm, high enough to hold a frame and low enough to hide behind a postcard\u003c\/li\u003e\n\u003cli\u003eSet contains eight ledges\u003c\/li\u003e\n\u003cli\u003eRecommended vertical spacing: 350mm to 450mm between ledges\u003c\/li\u003e\n\u003cli\u003eTotal weight: approximately 31.7 kilograms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEight picture ledges in birch plywood, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e24 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper template for each ledge\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gaps between rows\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776668471631,"sku":"HMS-PLS-045-BK","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776668504399,"sku":"HMS-PLS-045-RS","price":619.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776668537167,"sku":"HMS-PLS-045-WH","price":619.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_Set_of_Eight_in_Birch_Plywood_1200mm_Wide.jpg?v=1789050969"},{"product_id":"floating-shelf-in-solid-oak-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Oak 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid oak, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 13.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid oak, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680038735,"sku":"HMS-FLS-015-BK","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680071503,"sku":"HMS-FLS-015-RS","price":239.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680104271,"sku":"HMS-FLS-015-WH","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Oak_1200mm_Wide_by_200mm_Deep.jpg?v=1789050323"},{"product_id":"floating-shelf-in-solid-walnut-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Walnut 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid walnut, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 43kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid walnut, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680137039,"sku":"HMS-FLS-016-BK","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680169807,"sku":"HMS-FLS-016-RS","price":339.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680202575,"sku":"HMS-FLS-016-WH","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Walnut_1200mm_Wide_by_200mm_Deep.jpg?v=1789050324"},{"product_id":"floating-shelf-in-solid-ash-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Ash 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid ash, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 50mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 40kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 12.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid ash, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680268111,"sku":"HMS-FLS-017-BK","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680300879,"sku":"HMS-FLS-017-RS","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680333647,"sku":"HMS-FLS-017-WH","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Ash_1200mm_Wide_by_200mm_Deep.jpg?v=1789050315"},{"product_id":"floating-shelf-in-birch-plywood-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Birch Plywood 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in birch plywood, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 50mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 36kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.8 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in birch plywood, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680399183,"sku":"HMS-FLS-018-BK","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680431951,"sku":"HMS-FLS-018-RS","price":164.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680464719,"sku":"HMS-FLS-018-WH","price":164.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Birch_Plywood_1200mm_Wide_by_200mm_Deep.jpg?v=1789050346"},{"product_id":"floating-shelf-in-painted-mdf-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Painted MDF 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in painted mdf, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 50mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 33kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 15.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in painted mdf, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680497487,"sku":"HMS-FLS-019-BK","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680530255,"sku":"HMS-FLS-019-RS","price":149.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680563023,"sku":"HMS-FLS-019-WH","price":149.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Painted_MDF_1200mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-powder-coated-steel-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Powder Coated Steel 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in powder coated steel, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 52kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 11.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in powder coated steel, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680628559,"sku":"HMS-FLS-020-BK","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680661327,"sku":"HMS-FLS-020-RS","price":179.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680694095,"sku":"HMS-FLS-020-WH","price":179.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Powder_Coated_Steel_1200mm_Wide_by_200mm_Deep.jpg?v=1789050339"},{"product_id":"floating-shelf-in-solid-iroko-1200mm-wide-by-200mm-deep","title":"Floating Shelf in Solid Iroko 1200mm Wide by 200mm Deep","description":"\u003cp\u003eA single 1200mm floating shelf in solid iroko, 50mm thick with a welded steel frame hidden inside it. Sized for a sofa wall or a hallway.\u003c\/p\u003e\u003cp\u003eA floating shelf is a solid board with a steel frame hidden inside it. The frame is welded from 12mm bar, the board is machined to receive it on a CNC router so the fit is a light interference rather than a rattle, and the shelf slides onto the frame and locks with two grub screws underneath. Done properly the result is a shelf with no visible support that will take real weight. Done badly it is a shelf that droops at the front within a year, which is what happens when the frame is thin or the housing is cut oversize. Every board here is machined to a 0.3mm tolerance and every frame is welded rather than bolted.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 200mm deep by 50mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid iroko, 50mm thick, oiled, stable enough for a bathroom or a utility room\u003c\/li\u003e\n\u003cli\u003eFinish: oiled and ready to use, no visible fixings\u003c\/li\u003e\n\u003cli\u003eLoad rating: 44kg evenly distributed, tested to twice that\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: one welded frame, 3 wall fixings\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, so set the height out on paper first\u003c\/li\u003e\n\u003cli\u003eSuitable walls: timber stud at 400 or 600mm centres, brick, block and concrete. Not suitable for plasterboard on dabs without a timber backing batten\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eThickness: 50mm, which is what allows a concealed frame to carry load\u003c\/li\u003e\n\u003cli\u003eFrame: 12mm welded steel bar, machined into the board to 0.3mm\u003c\/li\u003e\n\u003cli\u003eProjection: 200mm as standard, 250mm and 300mm on request\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 14.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf in solid iroko, 1200mm by 200mm by 50mm\u003c\/li\u003e\n\u003cli\u003eOne welded steel frame\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eTwo grub screws and a hex key\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for the cut ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eMark the frame position, drill, fix the frame to the wall and check it for level in both directions before the shelf goes anywhere near it. That last check is the whole job. Once the frame is right the shelf slides on and two grub screws lock it. Allow half an hour for a single shelf and use the paper template rather than the frame itself for marking, because a frame held against a wall with one hand is never where you think it is.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776680759631,"sku":"HMS-FLS-021-BK","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776680792399,"sku":"HMS-FLS-021-RS","price":259.0,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776680825167,"sku":"HMS-FLS-021-WH","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Floating_Shelf_in_Solid_Iroko_1200mm_Wide_by_200mm_Deep.jpg?v=1789050341"},{"product_id":"picture-ledge-in-solid-oak-1200mm-wide","title":"Picture Ledge in Solid Oak 1200mm Wide","description":"\u003cp\u003eA single 1200mm picture ledge in solid oak, 90mm deep with a 22mm lip. Sized for three A3 frames or one large canvas leaning.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid oak, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684200271,"sku":"HMS-PLG-009-BK","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684233039,"sku":"HMS-PLG-009-RS","price":124.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684265807,"sku":"HMS-PLG-009-WH","price":124.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Oak_1200mm_Wide.jpg?v=1789050977"},{"product_id":"picture-ledge-in-solid-ash-1200mm-wide","title":"Picture Ledge in Solid Ash 1200mm Wide","description":"\u003cp\u003eA single 1200mm picture ledge in solid ash, 90mm deep with a 22mm lip. Sized for three A3 frames or one large canvas leaning.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 25kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.1 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid ash, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684331343,"sku":"HMS-PLG-010-BK","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684364111,"sku":"HMS-PLG-010-RS","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684396879,"sku":"HMS-PLG-010-WH","price":104.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Ash_1200mm_Wide.jpg?v=1789050993"},{"product_id":"picture-ledge-in-solid-walnut-1200mm-wide","title":"Picture Ledge in Solid Walnut 1200mm Wide","description":"\u003cp\u003eA single 1200mm picture ledge in solid walnut, 90mm deep with a 22mm lip. Sized for three A3 frames or one large canvas leaning.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 27kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 4.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in solid walnut, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684462415,"sku":"HMS-PLG-011-BK","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684495183,"sku":"HMS-PLG-011-RS","price":174.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684527951,"sku":"HMS-PLG-011-WH","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Solid_Walnut_1200mm_Wide.jpg?v=1789050964"},{"product_id":"picture-ledge-in-painted-mdf-1200mm-wide","title":"Picture Ledge in Painted MDF 1200mm Wide","description":"\u003cp\u003eA single 1200mm picture ledge in painted mdf, 90mm deep with a 22mm lip. Sized for three A3 frames or one large canvas leaning.\u003c\/p\u003e\u003cp\u003eA picture ledge is a lip and a shelf, and the only two dimensions that matter are the depth of the tray and the height of the lip. Too shallow and a framed A3 print falls off the front. Too deep and the ledge dominates the wall. Ours are 90mm deep with a 22mm lip, which holds anything from a postcard to a framed A2 leaning at a comfortable angle, and stacked two or three deep so you can change the arrangement without touching the wall.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 90mm deep, 22mm front lip, 32mm total thickness\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: oiled or sprayed and ready to use\u003c\/li\u003e\n\u003cli\u003eLoad rating: 21kg evenly distributed\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: 3 wall fixings straight through the back of the tray\u003c\/li\u003e\n\u003cli\u003eAdjustability: fixed once fitted, but everything on it moves freely\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eTray depth: 90mm, which takes a framed A2 leaning comfortably\u003c\/li\u003e\n\u003cli\u003eFront lip: 22mm\u003c\/li\u003e\n\u003cli\u003eFixing centres: marked on the template, aligned to 400mm stud centres where the length allows\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 5.3 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne picture ledge in painted mdf, 1200mm by 90mm\u003c\/li\u003e\n\u003cli\u003e3 wall fixings with the right plug for masonry\u003c\/li\u003e\n\u003cli\u003eA full length paper marking template\u003c\/li\u003e\n\u003cli\u003eA spacing card for setting the gap to the next row\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eA ledge fixes with two or three screws straight through the back of the tray, so the screw heads sit under whatever you lean against it. Level matters more here than on any other shelf, because a picture leaning on a ledge will slide slowly to the low end and tell everyone about it. Use the template, drill both holes before you fix either, and check with a level rather than by eye against a ceiling line.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776684626255,"sku":"HMS-PLG-012-BK","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776684659023,"sku":"HMS-PLG-012-RS","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776684691791,"sku":"HMS-PLG-012-WH","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Picture_Ledge_in_Painted_MDF_1200mm_Wide.jpg?v=1789050961"},{"product_id":"slotted-track-upright-1200mm","title":"Slotted Track Upright 1200mm","description":"\u003cp\u003eA single 1200mm slotted upright, for extending a system, replacing one, or building a wall from components. Sized for a short run above a desk or a worktop.\u003c\/p\u003e\u003cp\u003eThe upright is the part that does the work. Ours are folded from 1.5mm steel rather than 1mm, with a returned edge that stiffens the section and stops the slot deforming under load. The slots are punched on a 32mm pitch, which is the standard used across the trade, so our brackets fit other people's uprights and other people's brackets fit ours. Nothing here is proprietary and nothing traps you.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm long, 30mm wide, 14mm deep\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge\u003c\/li\u003e\n\u003cli\u003eFinish: powder coated in your chosen finish\u003c\/li\u003e\n\u003cli\u003eLoad rating: up to 160kg per upright when fixed at every hole into masonry\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: fix at 600mm centres for a 250mm shelf, 500mm centres for anything deeper\u003c\/li\u003e\n\u003cli\u003eAdjustability: slots on a 32mm pitch, 37 bracket positions\u003c\/li\u003e\n\u003cli\u003eSuitable walls: brick, block, concrete and timber stud. Plasterboard on dabs needs the long fixing kit, which is a free option at the checkout\u003c\/li\u003e\n\u003cli\u003eFixings: stainless screws and the right plug for masonry are included. Fixings for plasterboard on dabs and for metal stud are supplied on request at no charge\u003c\/li\u003e\n\u003cli\u003eSlot pitch: 32mm, the trade standard\u003c\/li\u003e\n\u003cli\u003eFixing holes: every 200mm, use every one on a heavy wall\u003c\/li\u003e\n\u003cli\u003eCompatible with any 32mm pitch bracket\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 1.6 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne slotted upright, 1200mm\u003c\/li\u003e\n\u003cli\u003e6 masonry fixings and plugs\u003c\/li\u003e\n\u003cli\u003eEnd caps, top and bottom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e\u003ch3\u003ePlanning your wall\u003c\/h3\u003e\u003cp\u003eWork from the top down. Set the top shelf where it looks right, usually a little above eye level, then space the rest below it. Books want 320mm between shelves for paperbacks and 400mm for hardbacks and art books, and there is no reason for the spacing to be equal. A wall of identical gaps reads as storage and a wall of varied gaps reads as a room. Leave the bottom shelf at least 300mm off the floor so a hoover and a skirting board both have somewhere to go.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"Matt black","offer_id":58776685379919,"sku":"HMS-UPR-001-BK","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Raw steel with a clear lacquer","offer_id":58776685412687,"sku":"HMS-UPR-001-RS","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Chalk white","offer_id":58776685445455,"sku":"HMS-UPR-001-WH","price":35.95,"currency_code":"GBP","in_stock":true},{"title":"Brushed brass","offer_id":58776685478223,"sku":"HMS-UPR-001-BR","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Slotted_Track_Upright_1200mm.jpg?v=1789050969"},{"product_id":"shelf-board-in-solid-oak-1200mm-wide-by-250mm-deep","title":"Shelf Board in Solid Oak 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in solid oak, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid European oak, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 48kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.4 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid oak, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690655567,"sku":"HMS-BRD-013-250","price":159.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690688335,"sku":"HMS-BRD-013-200","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690721103,"sku":"HMS-BRD-013-300","price":184.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690753871,"sku":"HMS-BRD-013-400","price":239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Oak_1200mm_Wide_by_250mm_Deep.jpg?v=1789050927"},{"product_id":"shelf-board-in-solid-walnut-1200mm-wide-by-250mm-deep","title":"Shelf Board in Solid Walnut 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in solid walnut, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid American black walnut, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 48kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 7.2 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid walnut, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690819407,"sku":"HMS-BRD-014-250","price":229.0,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776690852175,"sku":"HMS-BRD-014-200","price":194.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776690884943,"sku":"HMS-BRD-014-300","price":269.0,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776690917711,"sku":"HMS-BRD-014-400","price":339.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Walnut_1200mm_Wide_by_250mm_Deep.jpg?v=1789050922"},{"product_id":"shelf-board-in-solid-ash-1200mm-wide-by-250mm-deep","title":"Shelf Board in Solid Ash 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in solid ash, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: solid English ash, 30mm thick, finished in hardwax oil\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 45kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eMoisture content: 8 to 10 per cent, kiln dried\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.7 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in solid ash, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA sample pot of the matching oil for a cut end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776690983247,"sku":"HMS-BRD-015-250","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691016015,"sku":"HMS-BRD-015-200","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691048783,"sku":"HMS-BRD-015-300","price":154.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691081551,"sku":"HMS-BRD-015-400","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Solid_Ash_1200mm_Wide_by_250mm_Deep.jpg?v=1789050954"},{"product_id":"shelf-board-in-birch-plywood-1200mm-wide-by-250mm-deep","title":"Shelf Board in Birch Plywood 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in birch plywood, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 18 layer birch plywood, 30mm thick, lacquered with the edge left exposed\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 41kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.5 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in birch plywood, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691179855,"sku":"HMS-BRD-016-250","price":104.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691212623,"sku":"HMS-BRD-016-200","price":89.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691245391,"sku":"HMS-BRD-016-300","price":119.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691278159,"sku":"HMS-BRD-016-400","price":154.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-board-in-painted-mdf-1200mm-wide-by-250mm-deep","title":"Shelf Board in Painted MDF 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in painted mdf, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: moisture resistant MDF, 30mm thick, sprayed in a two pack polyurethane\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 37kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 8.9 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in painted mdf, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691343695,"sku":"HMS-BRD-017-250","price":94.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691376463,"sku":"HMS-BRD-017-200","price":79.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691409231,"sku":"HMS-BRD-017-300","price":109.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691441999,"sku":"HMS-BRD-017-400","price":144.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"shelf-board-in-powder-coated-steel-1200mm-wide-by-250mm-deep","title":"Shelf Board in Powder Coated Steel 1200mm Wide by 250mm Deep","description":"\u003cp\u003eA single 1200mm shelf board in powder coated steel, machined and finished, for adding a shelf to a system you already have. Sized for a two bay run.\u003c\/p\u003e\u003cp\u003eBoards are sold separately because a system usually grows one shelf at a time. Everything is machined from the same stock as the kits, finished on all six faces including the underside, and the front edge is eased with a 2mm radius so it does not mark a sleeve. Timber boards are cut from kiln dried stock at 8 to 10 per cent moisture content, which is what a heated house holds, so a board will not cup on you in the first winter.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 1200mm wide by 250mm deep by 30mm thick\u003c\/li\u003e\n\u003cli\u003eMaterial: 1.5mm folded steel with a returned edge, powder coated\u003c\/li\u003e\n\u003cli\u003eFinish: finished on all six faces, front edge eased to a 2mm radius\u003c\/li\u003e\n\u003cli\u003eLoad rating: 59kg evenly distributed on brackets at 600mm centres\u003c\/li\u003e\n\u003cli\u003eSpan and bracket spacing: supported at 600mm centres, maximum unsupported span 900mm\u003c\/li\u003e\n\u003cli\u003eAdjustability: drops onto brackets and locks with the shelf clip, so it moves with the shelf\u003c\/li\u003e\n\u003cli\u003eSuitable walls: not applicable, this is a board only\u003c\/li\u003e\n\u003cli\u003eFixings: not applicable\u003c\/li\u003e\n\u003cli\u003eDepth: 250mm as standard, 200mm, 300mm and 400mm on request\u003c\/li\u003e\n\u003cli\u003eStable engineered board, no moisture movement to speak of\u003c\/li\u003e\n\u003cli\u003eCut to a shorter length free of charge if you ask at the checkout\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.0 kilograms\u003c\/li\u003e\n\u003cli\u003eSold singly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you get\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne shelf board in powder coated steel, 1200mm by 250mm by 30mm\u003c\/li\u003e\n\u003cli\u003eTwo shelf clips\u003c\/li\u003e\n\u003cli\u003eA touch up pen in the matching colour\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitting\u003c\/h3\u003e\u003cp\u003eTwo people, a drill, a spirit level and about two hours for a single wall. Mark the top line first and hang every upright from it rather than measuring up from the floor, because floors are never level and a shelf that follows the floor looks wrong in a way nobody can put their finger on. Fix the first upright, level it, then use a shelf as a straight edge to set the next one. The fixing pack, a paper template and a printed sequence are in the box.\u003c\/p\u003e","brand":"Homartshelfs","offers":[{"title":"250mm deep","offer_id":58776691507535,"sku":"HMS-BRD-018-250","price":114.95,"currency_code":"GBP","in_stock":true},{"title":"200mm deep","offer_id":58776691540303,"sku":"HMS-BRD-018-200","price":99.95,"currency_code":"GBP","in_stock":true},{"title":"300mm deep","offer_id":58776691573071,"sku":"HMS-BRD-018-300","price":134.95,"currency_code":"GBP","in_stock":true},{"title":"400mm deep","offer_id":58776691605839,"sku":"HMS-BRD-018-400","price":174.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1039\/5281\/0319\/files\/Shelf_Board_in_Powder_Coated_Steel_1200mm_Wide_by_250mm_Deep.jpg?v=1789050984"}],"url":"https:\/\/homartshelfs.com\/collections\/1200mm-wide.oembed?page=2","provider":"Homart Shelfs","version":"1.0","type":"link"}